Steps To Fix Bad Windshield Wiper Motor Sound

Hi! good night, this day we will made an article about Steps To Fix Bad Windshield Wiper Motor Sound

Your vehicle’s windshield wiper motor may start to squeal or make a weird, bad sound over time. This is often the first sign that the engine is wearing out and about to say goodbye. But do not worry more here you will learn how to fix bad sound in wiper motor.

Automotive windshield wiper motors are sealed units that require little or no maintenance. The only way to fix a wiper motor is to lubricate the pivot arm or change the whole engine if it fails. Replacement motors can be purchased at most auto parts stores if it becomes apparent that it will need to be replaced.

How to fix bad noise in the windshield wiper motor?

Fix Wiper Motor Squealing Sound
Fix Wiper Motor Squealing Sound

The steps you must follow to solve that bad sound in the windshield wiper motor are the following:

  1. Open the hood and locate the wiper motor on your vehicle. It typically bolts to the firewall on the passenger side of the vehicle.
  1. Turn on the wipers and spray WD-40 on the wiper arm to rotate the arm linkage. Be sure to also lubricate the linkage that connects the pivot arm to the wiper motor with WD-40. If the screeching noise doesn’t go away, and you weren’t able to fix the bad noise in the wiper motor, then you may need to replace the motor.
  1. Turn off the windshield wipers.
  1. Now unplug the electrical connector from the wiper motor.
  1. Remove the bolts that hold the wiper motor to the pivot arm.
  1. Slide the wiper motor out of the pivot arm and install the new motor. Installation is the same action as removal but in reverse.

Well, these were the steps to take to remove that annoying sound that the windshield wiper motor can make when it is breaking down.

Your vehicle’s windshield wiper motor may start to squeal or make a weird, bad sound over time. This is often the first sign that the engine is wearing out and about to say goodbye. But do not worry more here you will learn how to fix bad sound in wiper motor.

Automotive windshield wiper motors are sealed units that require little or no maintenance. The only way to fix a wiper motor is to lubricate the pivot arm or change the whole engine if it fails. Replacement motors can be purchased at most auto parts stores if it becomes apparent that it will need to be replaced.

How to fix bad noise in the windshield wiper motor?

Fix Wiper Motor Squealing Sound
Fix Wiper Motor Squealing Sound

The steps you must follow to solve that bad sound in the windshield wiper motor are the following:

  1. Open the hood and locate the wiper motor on your vehicle. It typically bolts to the firewall on the passenger side of the vehicle.
  1. Turn on the wipers and spray WD-40 on the wiper arm to rotate the arm linkage. Be sure to also lubricate the linkage that connects the pivot arm to the wiper motor with WD-40. If the screeching noise doesn’t go away, and you weren’t able to fix the bad noise in the wiper motor, then you may need to replace the motor.
  1. Turn off the windshield wipers.
  1. Now unplug the electrical connector from the wiper motor.
  1. Remove the bolts that hold the wiper motor to the pivot arm.
  1. Slide the wiper motor out of the pivot arm and install the new motor. Installation is the same action as removal but in reverse.

Well, these were the steps to take to remove that annoying sound that the windshield wiper motor can make when it is breaking down.

Leave a Comment