Steps To Change The Serpentine Belt On A Kia Soul: + Tips

Hello! good morning, this day we will write an article about Steps To Change The Serpentine Belt On A Kia Soul: + Tips

The serpentine belt in a Kia Soul transmits power from the crankshaft to the various accessories on the engine. As the crankshaft pulley turns, it moves the serpentine belt, which then turns the other pulleys. Over time, the belt begins to stretch, crack, fray, and eventually break. Read on and learn how to change the serpentine belt on a kia soul.

Inspecting your belt for signs of wear is a good idea at every oil change interval. If you see any indicators of excessive wear, such as those mentioned recently, replace the belt immediately. This job requires basic automotive repair skills.

How to change the serpentine belt on a Kia Soul:

The steps to replace the serpentine belt on a Soul vehicle are as follows:

  1. Place the front wheels of the Kia Soul on the ramps. Put on the parking brake. Place the chocks directly behind the rear wheels.
  1. Go under the front with the serpentine belt tool. Remove the serpentine belt tensioner pulley from the belt using the belt tool.
  1. Slide the belt off the tensioner pulley with your other hand, then relax the tensioner and remove the tool.
  1. Remove the belt from the pulleys and pull it out by hand from under the engine. Guide the new belt around the pulleys, following the belt routing diagram located on the fan shroud, by hand.
  1. Pull the idler pulley back out of the way with the belt tool, slide the new belt over the idler pulley, and snap it back into place. Take the tool out of the tensioner and remove it from under the Kia Soul.
  1. Finally move the beams and get the Kia Soul off the ramps.

You can also read about: How To Reset A Kia Soul Airbag Lamp

Replacing The Serpentine Belt On A Kia Soul
Kia Soul 2017

The serpentine belt in a Kia Soul transmits power from the crankshaft to the various accessories on the engine. As the crankshaft pulley turns, it moves the serpentine belt, which then turns the other pulleys. Over time, the belt begins to stretch, crack, fray, and eventually break. Read on and learn how to change the serpentine belt on a kia soul.

Inspecting your belt for signs of wear is a good idea at every oil change interval. If you see any indicators of excessive wear, such as those mentioned recently, replace the belt immediately. This job requires basic automotive repair skills.

How to change the serpentine belt on a Kia Soul:

The steps to replace the serpentine belt on a Soul vehicle are as follows:

  1. Place the front wheels of the Kia Soul on the ramps. Put on the parking brake. Place the chocks directly behind the rear wheels.
  1. Go under the front with the serpentine belt tool. Remove the serpentine belt tensioner pulley from the belt using the belt tool.
  1. Slide the belt off the tensioner pulley with your other hand, then relax the tensioner and remove the tool.
  1. Remove the belt from the pulleys and pull it out by hand from under the engine. Guide the new belt around the pulleys, following the belt routing diagram located on the fan shroud, by hand.
  1. Pull the idler pulley back out of the way with the belt tool, slide the new belt over the idler pulley, and snap it back into place. Take the tool out of the tensioner and remove it from under the Kia Soul.
  1. Finally move the beams and get the Kia Soul off the ramps.

You can also read about: How To Reset A Kia Soul Airbag Lamp

Replacing The Serpentine Belt On A Kia Soul
Kia Soul 2017

Leave a Comment