Removing The Shift Lever From A Ford F-150 (Manual Transmission)

Hi! good morning, at this time i will write an article about Removing The Shift Lever From A Ford F-150 (Manual Transmission)

The shift lever on a Ford F-150 vehicle is simple to remove. If you need to access and work on the manual transmission because there is a fault or problem you have to remove the gear lever. In this article you will learn to remove the shifter from a Ford F-150 with a manual transmission.

Removing the shift lever is a repair step that does not require disabling the F-150 vehicle’s airbag system, unlike many mechanisms found in the dash. There are two primary reasons why you might consider doing this process.

If you’re upgrading and customizing the interior of the F-150, the shifter boot, lever and knob likely have aftermarket options to consider. At a more knowledgeable level, you’ll need to remove the shifter completely if you’re going to be accessing and working on your Ford F-150’s manual transmission.

Steps to remove the shifter from a Ford F-150 with a manual transmission

  1. You must first remove the 4 retaining screws of the gear lever box located in the corners of it. You will have to pry up each of the corners to get to the screws.
  1. Pull the trunk straight up to expose a nut and screw on the lever. It is not necessary to completely remove the trunk from the lever. So you can leave the shift knob alone.
  1. Unscrew the nut with a socket wrench. Next, push the threaded side of the bolt through the lever. Grab the bolt from the other side and pull it out of the shifter.
  1. Remove the shift lever from the square mount below it.
Removing The Shift Lever From A Ford F-150 With A Manual Transmission
Ford F-150

The shift lever on a Ford F-150 vehicle is simple to remove. If you need to access and work on the manual transmission because there is a fault or problem you have to remove the gear lever. In this article you will learn to remove the shifter from a Ford F-150 with a manual transmission.

Removing the shift lever is a repair step that does not require disabling the F-150 vehicle’s airbag system, unlike many mechanisms found in the dash. There are two primary reasons why you might consider doing this process.

If you’re upgrading and customizing the interior of the F-150, the shifter boot, lever and knob likely have aftermarket options to consider. At a more knowledgeable level, you’ll need to remove the shifter completely if you’re going to be accessing and working on your Ford F-150’s manual transmission.

Steps to remove the shifter from a Ford F-150 with a manual transmission

  1. You must first remove the 4 retaining screws of the gear lever box located in the corners of it. You will have to pry up each of the corners to get to the screws.
  1. Pull the trunk straight up to expose a nut and screw on the lever. It is not necessary to completely remove the trunk from the lever. So you can leave the shift knob alone.
  1. Unscrew the nut with a socket wrench. Next, push the threaded side of the bolt through the lever. Grab the bolt from the other side and pull it out of the shifter.
  1. Remove the shift lever from the square mount below it.
Removing The Shift Lever From A Ford F-150 With A Manual Transmission
Ford F-150

Leave a Comment