How To Use The 4 Wheel Drive System On A Grand Vitara

Hello! good morning, now i will created an article about How To Use The 4 Wheel Drive System On A Grand Vitara

Driving on slippery roads or areas without much traffic with the Grand Vitara is quite easy using the 4-wheel drive system. That’s why it’s good that you know How to Use the 4 Wheel Drive System on a Grand Vitara.

The Suzuki system is controlled from the dash via a rotary shift knob and lets you choose from 3 different modes to optimize the truck’s traction utility.

How to Use the 4 Wheel Drive System on a Grand Vitara

You should know that you have the possibility to choose the mode that you require so that the vehicle adapts to your driving style and to the travel and pavement requirements or while moving to a high degree. The car also has a low range that will give you more torque at low speeds if the high range doesn’t provide the necessary traction.

Paso 1:

Try to lift your foot off the accelerator pedal with your own foot, then try to press down on the selector knob and roll the selector to go from 4H to 4H Lock. Slowly apply pressure to the accelerator again and prepare to restore drive. The 4H Lock each of the 4 wheels will generate more traction, in case this action has not given you enough traction, then there is the possibility of using the 4L block.

Paso 2:

Bring the vehicle to a complete stop and put the transmission in neutral. Press the selector and try to make it roll from 4H Lock to the position that says 4L Lock. Wait five seconds, then put the transmission back in gear and resume driving. When 4L Lock is no longer needed, switch back to 4H Lock.

Paso 3:

Stop the vehicle and put the transmission in neutral. Press the selector and rotate it from 4L Lock to 4H Lock on the selector, take a break for about 5 seconds, then put the transmission in gear and continue driving. If perhaps you no longer need to use the blocking position, put the standard form back.

Paso 4:

Take your foot off the accelerator pedal, depress the selector knob and move the 4-wheel drive selector from 4H Lock to 4H. Slowly apply pressure to the accelerator again and rehabilitate standard driving.

advice and recommendation

If it is difficult to shift between “4H” and “4H LOCK” while the car is running, try speeding up and slowing down your car several times after moving the transfer knob. So you can use Suzuki’s 4-wheel drive system on a Grand Vitara with no hassle.

warnings

Do not move the selector knob or try to move the mode if the wheels are moving on the car. If this occurs, damage to the four-wheel drive system may occur.

How To Use The Four Wheel Drive System On A Grand Vitara
Suzuki Grand Vitara 2 Doors 2004

Driving on slippery roads or areas without much traffic with the Grand Vitara is quite easy using the 4-wheel drive system. That’s why it’s good that you know How to Use the 4 Wheel Drive System on a Grand Vitara.

The Suzuki system is controlled from the dash via a rotary shift knob and lets you choose from 3 different modes to optimize the truck’s traction utility.

How to Use the 4 Wheel Drive System on a Grand Vitara

You should know that you have the possibility to choose the mode that you require so that the vehicle adapts to your driving style and to the travel and pavement requirements or while moving to a high degree. The car also has a low range that will give you more torque at low speeds if the high range doesn’t provide the necessary traction.

Paso 1:

Try to lift your foot off the accelerator pedal with your own foot, then try to press down on the selector knob and roll the selector to go from 4H to 4H Lock. Slowly apply pressure to the accelerator again and prepare to restore drive. The 4H Lock each of the 4 wheels will generate more traction, in case this action has not given you enough traction, then there is the possibility of using the 4L block.

Paso 2:

Bring the vehicle to a complete stop and put the transmission in neutral. Press the selector and try to make it roll from 4H Lock to the position that says 4L Lock. Wait five seconds, then put the transmission back in gear and resume driving. When 4L Lock is no longer needed, switch back to 4H Lock.

Paso 3:

Stop the vehicle and put the transmission in neutral. Press the selector and rotate it from 4L Lock to 4H Lock on the selector, take a break for about 5 seconds, then put the transmission in gear and continue driving. If perhaps you no longer need to use the blocking position, put the standard form back.

Paso 4:

Take your foot off the accelerator pedal, depress the selector knob and move the 4-wheel drive selector from 4H Lock to 4H. Slowly apply pressure to the accelerator again and rehabilitate standard driving.

advice and recommendation

If it is difficult to shift between “4H” and “4H LOCK” while the car is running, try speeding up and slowing down your car several times after moving the transfer knob. So you can use Suzuki’s 4-wheel drive system on a Grand Vitara with no hassle.

warnings

Do not move the selector knob or try to move the mode if the wheels are moving on the car. If this occurs, damage to the four-wheel drive system may occur.

How To Use The Four Wheel Drive System On A Grand Vitara
Suzuki Grand Vitara 2 Doors 2004

Leave a Comment