How To Set A Car Alarm: Steps And Tips!

Hello! good morning, at this moment i will write an article about How To Set A Car Alarm: Steps And Tips!

Car alarms can provide an ideal way to protect your vehicle and any valuables in it. However, if you set the alarm sensitivity too high, it can become more of an annoyance than a convenience. That is why in this post we will explain how to set a car alarm correctly.

If your vehicle’s alarm goes off unnecessarily, like when you slam the door or a cat jumps on the hood, you may want to lower the sensitivity. The best thing is that you can complete this process with some basic tools.

How to set a car alarm

How to Set a Car Alarm
How to Set a Car Alarm

The steps you must follow to set a car alarm correctly are as follows:

  1. Locate the shock sensor, it is usually located under the instrument panel on the driver’s side. It should look like a small black or clear box about 3 square inches in diameter.
  1. Look for the adjustment dial, is a small dial or adjustment screw located along one side of the module. Turn the dial clockwise with your fingers or the tip of a slotted screwdriver to increase sensitivity; turn it now counterclockwise to reduce it.
  1. Gently tap various areas of the vehicle with the palm of your hand or with outstretched fingers to test the sensor; Remove any rings from your fingers before doing this step to avoid damaging your car. Test the sensitivity at all four corners of the car. Readjust the sensitivity of the alarm if necessary.

And in this way you will be able to adjust a car alarm correctly and without many complications.

How to Set a Car Alarm
How to Set a Car Alarm

Tips

The shock sensors in a vehicle alarm only respond to vibration and impact. Do not kick the tires or push the car to test the sensitivity. Most alarms come equipped with a sensor “double stage” which emits a short chirp for light impacts and emits the full siren on heavier impacts, keep this sensor in mind as you adjust.

The exact location of the shock sensor depends on where the installer (either factory or mechanic) placed it. The module is usually attached to a bundle of wires with wire ties. If the sensor is not easily accessible from under the dash, you may have disassembled part of the vehicle.

Start by removing the knee brace, or the panel below the steering column. The tools and process will depend on the type of vehicle. If the process seems complicated to get to the shock sensor, contact a professional for help.

Items you will need

The only items and tools you will use are:

  • Screwdrivers set
  • socket wrenches

Car alarms can provide an ideal way to protect your vehicle and any valuables in it. However, if you set the alarm sensitivity too high, it can become more of an annoyance than a convenience. That is why in this post we will explain how to set a car alarm correctly.

If your vehicle’s alarm goes off unnecessarily, like when you slam the door or a cat jumps on the hood, you may want to lower the sensitivity. The best thing is that you can complete this process with some basic tools.

How to set a car alarm

How to Set a Car Alarm
How to Set a Car Alarm

The steps you must follow to set a car alarm correctly are as follows:

  1. Locate the shock sensor, it is usually located under the instrument panel on the driver’s side. It should look like a small black or clear box about 3 square inches in diameter.
  1. Look for the adjustment dial, is a small dial or adjustment screw located along one side of the module. Turn the dial clockwise with your fingers or the tip of a slotted screwdriver to increase sensitivity; turn it now counterclockwise to reduce it.
  1. Gently tap various areas of the vehicle with the palm of your hand or with outstretched fingers to test the sensor; Remove any rings from your fingers before doing this step to avoid damaging your car. Test the sensitivity at all four corners of the car. Readjust the sensitivity of the alarm if necessary.

And in this way you will be able to adjust a car alarm correctly and without many complications.

How to Set a Car Alarm
How to Set a Car Alarm

Tips

The shock sensors in a vehicle alarm only respond to vibration and impact. Do not kick the tires or push the car to test the sensitivity. Most alarms come equipped with a sensor “double stage” which emits a short chirp for light impacts and emits the full siren on heavier impacts, keep this sensor in mind as you adjust.

The exact location of the shock sensor depends on where the installer (either factory or mechanic) placed it. The module is usually attached to a bundle of wires with wire ties. If the sensor is not easily accessible from under the dash, you may have disassembled part of the vehicle.

Start by removing the knee brace, or the panel below the steering column. The tools and process will depend on the type of vehicle. If the process seems complicated to get to the shock sensor, contact a professional for help.

Items you will need

The only items and tools you will use are:

  • Screwdrivers set
  • socket wrenches

Leave a Comment