Hello! good night, now we will created an article about How To Reset The Hood System On A BMW E46 Convertible
The BMW E46 is another name for the 3 Series that was produced between 1998 and 2004. Some E46 models are equipped with fully automatic convertible tops or hoods. The top must be completely closed to prevent water from entering the vehicle during wet weather. If your vehicle does not close properly, keep reading and learn how to reset the soft top system of a BMW E46 convertible.
If the top does not close completely with the automatic controls, it must be manually reset. The BMW E46 must be completely stationary when opening or closing the convertible top to prevent the mechanism from being damaged.
Reset the soft top system of a BMW E46 convertible
To restart or reset the hood system of a BMW E46 convertible, you must follow a series of steps that we will reveal to you below:
- Press the emergency lock button, located between the rear seats. Release the button.
- Hold the convertible top by the side and by the upper convertible top frame. Lift the top up and forward until you meet resistance. Fold down the top frame of the convertible.
- Pull out the cover panel in the center of the convertible front upper frame. Insert the Allen key that came with the E46 into the hole that is now exposed.
- Turn the Allen key clockwise until the front convertible top frame locks into the windshield frame. The mechanism automatically seals the lid at this point.
Advice
As you may have noticed, restarting or resetting the hood system of a BMW E46 convertible is not complicated, but you do have to be careful to do the job right.
Items you will need
For this job you only have to use one item:
The BMW E46 is another name for the 3 Series that was produced between 1998 and 2004. Some E46 models are equipped with fully automatic convertible tops or hoods. The top must be completely closed to prevent water from entering the vehicle during wet weather. If your vehicle does not close properly, keep reading and learn how to reset the soft top system of a BMW E46 convertible.
If the top does not close completely with the automatic controls, it must be manually reset. The BMW E46 must be completely stationary when opening or closing the convertible top to prevent the mechanism from being damaged.
Reset the soft top system of a BMW E46 convertible
To restart or reset the hood system of a BMW E46 convertible, you must follow a series of steps that we will reveal to you below:
- Press the emergency lock button, located between the rear seats. Release the button.
- Hold the convertible top by the side and by the upper convertible top frame. Lift the top up and forward until you meet resistance. Fold down the top frame of the convertible.
- Pull out the cover panel in the center of the convertible front upper frame. Insert the Allen key that came with the E46 into the hole that is now exposed.
- Turn the Allen key clockwise until the front convertible top frame locks into the windshield frame. The mechanism automatically seals the lid at this point.
Advice
As you may have noticed, restarting or resetting the hood system of a BMW E46 convertible is not complicated, but you do have to be careful to do the job right.
Items you will need
For this job you only have to use one item:
