How to Reset the Airbag Status Light on a Nissan Rogue

Hi! good afternoon, now we will created an article about How to Reset the Airbag Status Light on a Nissan Rogue

If you’ve perhaps recently installed a new stereo or removed the seats in your Nissan, you may have noticed that the Airbag Status Light won’t stop flashing. There is a simple solution to this that saves you from having to take it to the dealer. Follow these steps to reset the airbag status light on a nissan rogue car.

Steps to Reset the Airbag Status Light on a Nissan Rogue

The steps to follow to restore the airbag status light are as follows:

  1. Insert the key into the ignition and turn the key to the ON position.
  1. Note that the light will stay on and then begin to flash. After turning the key ON, wait until the light turns off, to begin the flashing process, and then turn the key off and remove the key.
  1. Wait 5 seconds. Put the key back in the ignition and repeat step 1.
  1. Again wait 5 seconds and repeat step 1. This must be completed three times. The Airbag Status Light may have a different flash pattern at this point. Just follow the same easy steps. Insert the key into the ignition and turn it to the ON position and wait until the light goes out to begin the flashing process and quickly turn the key to the OFF position and remove the key. Do this process a total of 2 more times.
  1. When it’s finally done, you should have inserted the key and removed it a total of 6 times. Now turn the key and start the car. The status light should stay on and eventually go off as usual. If the light starts flashing again, repeat the steps above. This will help you reset the airbag status light on a Nissan Rogue vehicle.
Airbag from a Nissan Rogue
Airbag from a Nissan Rogue

You can also find out about: Flashing Signal On A Dashboard In A Rogue

If you’ve perhaps recently installed a new stereo or removed the seats in your Nissan, you may have noticed that the Airbag Status Light won’t stop flashing. There is a simple solution to this that saves you from having to take it to the dealer. Follow these steps to reset the airbag status light on a nissan rogue car.

Steps to Reset the Airbag Status Light on a Nissan Rogue

The steps to follow to restore the airbag status light are as follows:

  1. Insert the key into the ignition and turn the key to the ON position.
  1. Note that the light will stay on and then begin to flash. After turning the key ON, wait until the light turns off, to begin the flashing process, and then turn the key off and remove the key.
  1. Wait 5 seconds. Put the key back in the ignition and repeat step 1.
  1. Again wait 5 seconds and repeat step 1. This must be completed three times. The Airbag Status Light may have a different flash pattern at this point. Just follow the same easy steps. Insert the key into the ignition and turn it to the ON position and wait until the light goes out to begin the flashing process and quickly turn the key to the OFF position and remove the key. Do this process a total of 2 more times.
  1. When it’s finally done, you should have inserted the key and removed it a total of 6 times. Now turn the key and start the car. The status light should stay on and eventually go off as usual. If the light starts flashing again, repeat the steps above. This will help you reset the airbag status light on a Nissan Rogue vehicle.
Airbag from a Nissan Rogue
Airbag from a Nissan Rogue

You can also find out about: Flashing Signal On A Dashboard In A Rogue

Leave a Comment