How to Remove and Change the Alternator on a Chevrolet Aveo

Hi-ya! good night, today i will made an article about How to Remove and Change the Alternator on a Chevrolet Aveo

Saber how to change the alternator on a chevrolet aveo it’s a skill you can learn, plus it’s an important DIY project that will save you money. The alternator of your Chevy Aveo is the device that is responsible for charging the battery and producing electricity for the ignition system as well as other accessories in the vehicle.

You may be dealing with alternator failure, if you experience a weak battery on a regular basis. If you remove the alternator from the car, you will be able to test or replace it.

How to Change the Alternator on a Chevrolet Aveo

Remove The Alternator From A Chevy Aveo
Gran Chevrolet Aveo

You can buy a new or remanufactured alternator yourself at one of the nearest auto parts stores, plus most of these stores will bench test your old starter for free if you decide to take it to the store. Removing and changing the alternator on a Chevy Aveo is simple, just follow a few steps:

  1. Remove the negative battery cable After loosening the retaining bolt with the help of a wrench, you should then set the cable aside so that it is removed from the battery contacts.
  1. Locate the electrical connector on the air tube of your Chevy Aveoyou should know that the air tube is the one that goes through the upper part of the engine from the air box to the throttle body, you have to disconnect the connector and place the cables aside.
  1. Remove the clamps on both ends of the air tube, and remove the air tube from the engine and put it in a safe place. The tube runs over the top of the alternator locations so these need to be removed to access the alternator.
  1. Locate the wiring harness connector at the rear of the alternator.. Remove the nut from the connector with a wrench and set the wire aside.
  1. Loosen the upper and lower mounting bolts on the alternator with a socket and ratchet., and then remove the serpentine belt from the pulley after releasing the belt tension. The tensioner is located in the front area of ​​the engine; you need to turn it counterclockwise with the help of a socket and ratchet in order to release the tension.
  1. Remove the alternator mounting bolts and remove them from the engine compartment., then you need to place the new alternator on the mounting bracket and install the mounting bolts with a socket and ratchet. Torque the bolts to 18 foot-pounds with a torque wrench.
  1. Install the harness connector on the rear of the alternator. and tighten the retaining nut with a socket and ratchet, then tighten the nut to 11 foot-pounds with a torque wrench.
  1. Release the tension on the serpentine belt tensioner with the ratchet and socket, and then install the belt onto the alternator. Turn the tensioner clockwise, allowing the belt to tighten.
  1. Install the negative battery cable on the same negative post you removed it from, finally tightening the retaining bolt on the end of the cable with a crescent wrench.

Advice

As you can see, changing the alternator of a Chevrolet Aveo is not a complicated task, you just have to have a few tools that you surely already have and follow the corresponding steps.

Items you will need

The articles or instruments that you will use are the following:

  • Set of keys (Ratchet)
  • Socket or socket wrench set

Saber how to change the alternator on a chevrolet aveo it’s a skill you can learn, plus it’s an important DIY project that will save you money. The alternator of your Chevy Aveo is the device that is responsible for charging the battery and producing electricity for the ignition system as well as other accessories in the vehicle.

You may be dealing with alternator failure, if you experience a weak battery on a regular basis. If you remove the alternator from the car, you will be able to test or replace it.

How to Change the Alternator on a Chevrolet Aveo

Remove The Alternator From A Chevy Aveo
Gran Chevrolet Aveo

You can buy a new or remanufactured alternator yourself at one of the nearest auto parts stores, plus most of these stores will bench test your old starter for free if you decide to take it to the store. Removing and changing the alternator on a Chevy Aveo is simple, just follow a few steps:

  1. Remove the negative battery cable After loosening the retaining bolt with the help of a wrench, you should then set the cable aside so that it is removed from the battery contacts.
  1. Locate the electrical connector on the air tube of your Chevy Aveoyou should know that the air tube is the one that goes through the upper part of the engine from the air box to the throttle body, you have to disconnect the connector and place the cables aside.
  1. Remove the clamps on both ends of the air tube, and remove the air tube from the engine and put it in a safe place. The tube runs over the top of the alternator locations so these need to be removed to access the alternator.
  1. Locate the wiring harness connector at the rear of the alternator.. Remove the nut from the connector with a wrench and set the wire aside.
  1. Loosen the upper and lower mounting bolts on the alternator with a socket and ratchet., and then remove the serpentine belt from the pulley after releasing the belt tension. The tensioner is located in the front area of ​​the engine; you need to turn it counterclockwise with the help of a socket and ratchet in order to release the tension.
  1. Remove the alternator mounting bolts and remove them from the engine compartment., then you need to place the new alternator on the mounting bracket and install the mounting bolts with a socket and ratchet. Torque the bolts to 18 foot-pounds with a torque wrench.
  1. Install the harness connector on the rear of the alternator. and tighten the retaining nut with a socket and ratchet, then tighten the nut to 11 foot-pounds with a torque wrench.
  1. Release the tension on the serpentine belt tensioner with the ratchet and socket, and then install the belt onto the alternator. Turn the tensioner clockwise, allowing the belt to tighten.
  1. Install the negative battery cable on the same negative post you removed it from, finally tightening the retaining bolt on the end of the cable with a crescent wrench.

Advice

As you can see, changing the alternator of a Chevrolet Aveo is not a complicated task, you just have to have a few tools that you surely already have and follow the corresponding steps.

Items you will need

The articles or instruments that you will use are the following:

  • Set of keys (Ratchet)
  • Socket or socket wrench set

Leave a Comment