How To Properly Clean The ABS Sensors On A Chevrolet Silverado

Hello! good night, now we will made an article about How To Properly Clean The ABS Sensors On A Chevrolet Silverado

In a Chevy Silverado, the ABS sensors (anti-lock braking system) are the ones in charge of continuously evaluating the speed at which the wheels go. This data is transmitted to a computer that will automatically pump the brakes if the sensor “sees” the wheels locking. That is why you must always be attentive to the brake system, so that it works well. Keep reading until the end and learn how to clean the ABS Sensors on a Chevrolet Silverado.

Over the days the sensors could get dirty and cause the ABS to work only intermittently. To fix this problem, it is necessary to clean the ABS sensors.

How to Clean the ABS Sensors on a Chevrolet Silverado

Clean the ABS Sensors on a Chevrolet Silverado
Chevrolet Silverado LT 2010

Here is a series of steps in which you will learn how to clean the ABS Sensors on a Chevy Silverado vehicle.

  1. Put your Chevrolet Silverado on jack stands. Jack up on the front cross member using a floor jack and position the jack under the front pinch welds (or cross member bracket ends) under the driver and passenger side doors. Then lower the truck onto the jack stands.
  1. Remove the lug nuts with an impact wrench (you can use a manual or power one) thereby removing the wheels from the axle.
  1. Remove the upper and lower caliper mounting bolts and bring the caliper off the rotor, then secure to the coil springs with the mounts.
  1. Pull the brake rotor (or disc) off the wheel axle.
  1. Locate the ABS sensor on the wheel hub at the rear of the brake rotor. In turn, you should be able to see the sensor and the pump from the rear of the wheel axle. The front of the sensor, however, faces the rear of the rotor. The ABS sensors are similar to a tiny box that is black or silver in color and looks like a “L” (given model and year). The box should have an electrical connector plugged into the bottom area (in the rear area of ​​the sensor).
  1. Spray your sensor with brake parts cleaner until you no longer notice any dirty areas or small debris on the sensor. You also have to water the rear area of ​​the wheel axle and clean the entire site around the sensor, you must also go through the front part of the sensor.

With these steps you will be able to clean the ABS Sensors in a Chevrolet Silverado perfectly and thus avoid problems with the brake system.

It may interest you: How to Turn Off the ABS Brake Lights on a Chevy Silverado

Servicing the ABS Sensors in a Chevrolet Silverado
Chevrolet Silverado LT 2019

Advice

You should know that:

  • Brake parts cleaners are powerful solvents that eradicate debris located on and around the sensor. However, this brake parts cleaner is not safe for painted surfaces and various electrical devices, its use on the ABS sensor is completely safe.

Items you will need

The tools and materials to use here are:

  • jack stands
  • Impact wrench (manual or electric)
  • Socket wrench (or socket)
  • Socket set (or socket)
  • Flanges (or adhesion)
  • Brake parts cleaner.

In a Chevy Silverado, the ABS sensors (anti-lock braking system) are the ones in charge of continuously evaluating the speed at which the wheels go. This data is transmitted to a computer that will automatically pump the brakes if the sensor “sees” the wheels locking. That is why you must always be attentive to the brake system, so that it works well. Keep reading until the end and learn how to clean the ABS Sensors on a Chevrolet Silverado.

Over the days the sensors could get dirty and cause the ABS to work only intermittently. To fix this problem, it is necessary to clean the ABS sensors.

How to Clean the ABS Sensors on a Chevrolet Silverado

Clean the ABS Sensors on a Chevrolet Silverado
Chevrolet Silverado LT 2010

Here is a series of steps in which you will learn how to clean the ABS Sensors on a Chevy Silverado vehicle.

  1. Put your Chevrolet Silverado on jack stands. Jack up on the front cross member using a floor jack and position the jack under the front pinch welds (or cross member bracket ends) under the driver and passenger side doors. Then lower the truck onto the jack stands.
  1. Remove the lug nuts with an impact wrench (you can use a manual or power one) thereby removing the wheels from the axle.
  1. Remove the upper and lower caliper mounting bolts and bring the caliper off the rotor, then secure to the coil springs with the mounts.
  1. Pull the brake rotor (or disc) off the wheel axle.
  1. Locate the ABS sensor on the wheel hub at the rear of the brake rotor. In turn, you should be able to see the sensor and the pump from the rear of the wheel axle. The front of the sensor, however, faces the rear of the rotor. The ABS sensors are similar to a tiny box that is black or silver in color and looks like a “L” (given model and year). The box should have an electrical connector plugged into the bottom area (in the rear area of ​​the sensor).
  1. Spray your sensor with brake parts cleaner until you no longer notice any dirty areas or small debris on the sensor. You also have to water the rear area of ​​the wheel axle and clean the entire site around the sensor, you must also go through the front part of the sensor.

With these steps you will be able to clean the ABS Sensors in a Chevrolet Silverado perfectly and thus avoid problems with the brake system.

It may interest you: How to Turn Off the ABS Brake Lights on a Chevy Silverado

Servicing the ABS Sensors in a Chevrolet Silverado
Chevrolet Silverado LT 2019

Advice

You should know that:

  • Brake parts cleaners are powerful solvents that eradicate debris located on and around the sensor. However, this brake parts cleaner is not safe for painted surfaces and various electrical devices, its use on the ABS sensor is completely safe.

Items you will need

The tools and materials to use here are:

  • jack stands
  • Impact wrench (manual or electric)
  • Socket wrench (or socket)
  • Socket set (or socket)
  • Flanges (or adhesion)
  • Brake parts cleaner.

Leave a Comment