How to Program Transponder Keys on a Corolla

Hi-ya! good morning, this day we will write an article about How to Program Transponder Keys on a Corolla

In this article you will learn how to program transponder keys in a corolla. It can be replacement or a keyless remote for Corolla models without any special equipment or computer software. Read to the end!

The Toyota Corolla is a car that has undergone many modifications over the years, including the addition of the transponder key in the most recent models. In addition, Corollas are one of the best-selling vehicles in the history of the United States, exceeding 30 million cars sold since its inception in the 1960s.

How to program transponder keys on a Corolla?

How to Fix Transponder Keys on a Corolla
Toyota Corolla SX sedan 2013-2016

Transponder keys are coded to work with a computer chip in your Corolla, allowing it to operate on your car and only your car.

In the event that you purchase an additional key for your Toyota Corolla, it will not be programmed to work with your Corolla. Luckily, you can program your transponder keys on your own in just a few minutes.

Follow the next steps to program the transponder keys in a Corolla:

  1. Sit in your Corolla, leaving only the driver’s door open and unlocked. Then put your key in the ignition and quickly pull it out. You will only have five seconds to execute this step twice.
  1. Now close the driver’s door and proceed to open it twice. Insert the key into the ignition and quickly remove it. You should complete this step in just 40 seconds.
  1. Next you must close the door and open it twice, put the key in the ignition switch and proceed to close the door again. Now turn the key to position “On” and then turn off the car and remove it from the ignition switch. You only have 40 seconds to complete this step.
  1. Hear the door locks to run a cycle, indicating that they will lock and unlock on their own. Closing devices have to function within three seconds to meet the third step. If they don’t, then that would indicate that programming the Corolla’s transponder keys didn’t work and you’ll have to start the process over.
  1. Locate the lock and unlock buttons on the keyless entry remote and hold them down at the same time for up to a second and a half. Release both buttons and hold the lock button for 2 seconds, until the door locking devices work again.

Don’t stop reading: How to Fix Alarm Failures on a Toyota Corolla

Transponder Keys In A Toyota Corolla
Toyota Corolla 2009

Finally with all this, the transponder key of your Toyota Corolla is now programmed. Take the key out of the ignition and with this you can get out of the car.

In this article you will learn how to program transponder keys in a corolla. It can be replacement or a keyless remote for Corolla models without any special equipment or computer software. Read to the end!

The Toyota Corolla is a car that has undergone many modifications over the years, including the addition of the transponder key in the most recent models. In addition, Corollas are one of the best-selling vehicles in the history of the United States, exceeding 30 million cars sold since its inception in the 1960s.

How to program transponder keys on a Corolla?

How to Fix Transponder Keys on a Corolla
Toyota Corolla SX sedan 2013-2016

Transponder keys are coded to work with a computer chip in your Corolla, allowing it to operate on your car and only your car.

In the event that you purchase an additional key for your Toyota Corolla, it will not be programmed to work with your Corolla. Luckily, you can program your transponder keys on your own in just a few minutes.

Follow the next steps to program the transponder keys in a Corolla:

  1. Sit in your Corolla, leaving only the driver’s door open and unlocked. Then put your key in the ignition and quickly pull it out. You will only have five seconds to execute this step twice.
  1. Now close the driver’s door and proceed to open it twice. Insert the key into the ignition and quickly remove it. You should complete this step in just 40 seconds.
  1. Next you must close the door and open it twice, put the key in the ignition switch and proceed to close the door again. Now turn the key to position “On” and then turn off the car and remove it from the ignition switch. You only have 40 seconds to complete this step.
  1. Hear the door locks to run a cycle, indicating that they will lock and unlock on their own. Closing devices have to function within three seconds to meet the third step. If they don’t, then that would indicate that programming the Corolla’s transponder keys didn’t work and you’ll have to start the process over.
  1. Locate the lock and unlock buttons on the keyless entry remote and hold them down at the same time for up to a second and a half. Release both buttons and hold the lock button for 2 seconds, until the door locking devices work again.

Don’t stop reading: How to Fix Alarm Failures on a Toyota Corolla

Transponder Keys In A Toyota Corolla
Toyota Corolla 2009

Finally with all this, the transponder key of your Toyota Corolla is now programmed. Take the key out of the ignition and with this you can get out of the car.

Leave a Comment