Hello! good morning, at this time we will made an article about How to Program the Remote Control of a Chevrolet Tahoe
The Chevy Tahoe comes standard with remote keyless entry, as do many modern vehicles. If your remote control is lost or damaged and you wish to replace it, you will need to schedule your replacement before it can be used. Read on and discover how to program the remote for a chevrolet tahoe.
You can also program additional remotes beyond the two that came with your Tahoe (Tahoe’s memory will store up to eight). The process is different between the third generation (2007 to 2010) and the second generation Tahoe (1999 to 2006).
Steps to program the remote for a Chevrolet Tahoe
You already know that to program the remote control of a Chevy Tahoe you must first know the steps for the generation to which your vehicle belongs.
Third generation Tahoe (2007 to 2010)
- Put your Tahoe in park and turn the key to the “On“.
- Press and hold the tripmeter button (to the right of the instrument cluster) for three seconds, until the message “Remote Key Learning Active” (Learning with remote keys active).
- Try to hold down the buttons”Lock” y “Unlock” on the remote control for fifteen to twenty seconds, until you hear a confirmation chime.
- Turn the ignition to the “” positionOff” and remove the key to end the programming sequence.
Second generation Tahoe (1999 to 2006)
- Make sure all doors are locked and insert the key without turning it.
- Press and hold the ” buttonUnlock” on the door panel (hold it down while doing step three).
- Put the ignition on “ON” (not booting) and then put it back to “Off“. Then you must turn it to “On” and return to “Off“.
- Release the button “Unlock” on the door panel.
- Hold down the “Unlock” y “Lock” on the remote control until the door locks (this will take approximately 30 seconds).
The Chevy Tahoe comes standard with remote keyless entry, as do many modern vehicles. If your remote control is lost or damaged and you wish to replace it, you will need to schedule your replacement before it can be used. Read on and discover how to program the remote for a chevrolet tahoe.
You can also program additional remotes beyond the two that came with your Tahoe (Tahoe’s memory will store up to eight). The process is different between the third generation (2007 to 2010) and the second generation Tahoe (1999 to 2006).
Steps to program the remote for a Chevrolet Tahoe
You already know that to program the remote control of a Chevy Tahoe you must first know the steps for the generation to which your vehicle belongs.
Third generation Tahoe (2007 to 2010)
- Put your Tahoe in park and turn the key to the “On“.
- Press and hold the tripmeter button (to the right of the instrument cluster) for three seconds, until the message “Remote Key Learning Active” (Learning with remote keys active).
- Try to hold down the buttons”Lock” y “Unlock” on the remote control for fifteen to twenty seconds, until you hear a confirmation chime.
- Turn the ignition to the “” positionOff” and remove the key to end the programming sequence.
Second generation Tahoe (1999 to 2006)
- Make sure all doors are locked and insert the key without turning it.
- Press and hold the ” buttonUnlock” on the door panel (hold it down while doing step three).
- Put the ignition on “ON” (not booting) and then put it back to “Off“. Then you must turn it to “On” and return to “Off“.
- Release the button “Unlock” on the door panel.
- Hold down the “Unlock” y “Lock” on the remote control until the door locks (this will take approximately 30 seconds).
