How To Make A Car Alarm More Sensitive: More Advice

Hello! good morning, today we will write an article about How To Make A Car Alarm More Sensitive: More Advice

If you think that the sensitivity of your vehicle’s alarm is too weak, you can increase that sensitivity to make it more responsive. Continue reading to the end and learn how to make a car alarm more sensitive.

Car alarms are equipped with sensors located throughout the vehicle that act as detection devices. The most common sensor is connected to the doors. When the alarm system is in operation and the door is opened, the sensor communicates this to the brain.

The brain sends a signal to the components of the alarm system, such as the lights, siren or horn, to alert the owner of a possible break-in. Other sensors respond to impacts in different areas of the vehicle. If you think your car alarm sensitivity is too weak, you can increase it to respond better.

How to make a car alarm more sensitive?

How To Make A Car Alarm Sensitive
How To Make A Car Alarm Sensitive

The steps you must follow to make your car alarm more sensitive are the following:

  1. Find the impact sensor located under the dash on the driver’s side. It resembles a small black box about 4 inches in diameter.
  1. Locate an adjustment dial or adjustment screw on the side of the shock sensor. Turn the dial clockwise with your fingers or the blade of a flathead screwdriver.
  1. Hit all four corners of the car with the palm of your hand. Remove any jewelry that could damage your vehicle’s finish before doing this. Also, increase the alarm sensitivity if the alarm does not sound when performing this test.

Advice

The location of the shock sensor varies depending on where the installer or mechanic installed it. It may be located under the steering column or in another accessible area. Further disassembly of the vehicle may be required, depending on where the sensor is located.

Make a car alarm more sensitive
Make a car alarm more sensitive

Items you will need

The only tool you will need is:

  • flat head screwdriver

If you think that the sensitivity of your vehicle’s alarm is too weak, you can increase that sensitivity to make it more responsive. Continue reading to the end and learn how to make a car alarm more sensitive.

Car alarms are equipped with sensors located throughout the vehicle that act as detection devices. The most common sensor is connected to the doors. When the alarm system is in operation and the door is opened, the sensor communicates this to the brain.

The brain sends a signal to the components of the alarm system, such as the lights, siren or horn, to alert the owner of a possible break-in. Other sensors respond to impacts in different areas of the vehicle. If you think your car alarm sensitivity is too weak, you can increase it to respond better.

How to make a car alarm more sensitive?

How To Make A Car Alarm Sensitive
How To Make A Car Alarm Sensitive

The steps you must follow to make your car alarm more sensitive are the following:

  1. Find the impact sensor located under the dash on the driver’s side. It resembles a small black box about 4 inches in diameter.
  1. Locate an adjustment dial or adjustment screw on the side of the shock sensor. Turn the dial clockwise with your fingers or the blade of a flathead screwdriver.
  1. Hit all four corners of the car with the palm of your hand. Remove any jewelry that could damage your vehicle’s finish before doing this. Also, increase the alarm sensitivity if the alarm does not sound when performing this test.

Advice

The location of the shock sensor varies depending on where the installer or mechanic installed it. It may be located under the steering column or in another accessible area. Further disassembly of the vehicle may be required, depending on where the sensor is located.

Make a car alarm more sensitive
Make a car alarm more sensitive

Items you will need

The only tool you will need is:

  • flat head screwdriver

Leave a Comment