How To Install The Tow Bar In A Corsa: + Advice!

Hello! good afternoon, at this time i will write an article about How To Install The Tow Bar In A Corsa: + Advice!

The Chevrolet Corsa or Vauxhall Corsa is a beautiful compact European sedan that is manufactured as a three-door model. The Vauxhall Corsa (The European Corsa) is compatible with a tow bar. This time we will be guiding you in the installation of the tow bar on a Corsa.

To install a tow bar on your Corsa, it is necessary to remove the rear bumper and several other components. You’ll also need a Vauxhall Corsa tow bar kit, available at most auto parts stores.

How to install the tow bar on a Corsa

Mount the tow bar in a Corsa
Chevrolet Corsa

The tow bar is important in cars. To install and mount a tow bar on a Corsa, just follow the steps below:

  1. Park your Corsa vehicle on flat ground or comfortable to work.
  1. Unscrew the bolts surrounding the rear bumper with a counterclockwise screwdriver.
  1. Remove all lug nuts from under the wheel arches with a wrench to free your Corsa’s wheel arch trims and rear bumper tips.
  1. Carefully cut a 140mm by 50mm piece of the lower edge of the rear bumper with a jigsaw to reveal and remove the Corsa’s metal impact beam.
  1. Remove the trim on the rear bumper panel and unscrew its bolts with a power drill.
  1. place the plates (included with the tow bar kit) on each end of the Corsa panel, then loosen the bolts with a power drill.
  1. Position the center tube (included with the tow bar kit) under the Corsa’s spare wheel tray, then remove the spare wheel and center bolt with a power drill.
  1. Mount the cross bar (included with the tow bar kit) and screw in the center bolt with a large flat washer.
  1. Straighten the crossbar with your hands to align with the rear body of the Corsa and remove the bolts with a power drill. Attach the large washers to the bolts and screw them back in using a power drill..
  1. Reinstall and tighten all the bolts that were removed from the Corsa, then reattach the crash beam, spare tire, rear bumper, and wheel arches.

Advice

Installing the tow bar on a Corsa is not a difficult task, you just need to have a few tools on hand. Remember not to forget to mount everything you removed to install the tow bar to the vehicle.

Install the tow bar in a Corsa
Race part tracera

The Chevrolet Corsa or Vauxhall Corsa is a beautiful compact European sedan that is manufactured as a three-door model. The Vauxhall Corsa (The European Corsa) is compatible with a tow bar. This time we will be guiding you in the installation of the tow bar on a Corsa.

To install a tow bar on your Corsa, it is necessary to remove the rear bumper and several other components. You’ll also need a Vauxhall Corsa tow bar kit, available at most auto parts stores.

How to install the tow bar on a Corsa

Mount the tow bar in a Corsa
Chevrolet Corsa

The tow bar is important in cars. To install and mount a tow bar on a Corsa, just follow the steps below:

  1. Park your Corsa vehicle on flat ground or comfortable to work.
  1. Unscrew the bolts surrounding the rear bumper with a counterclockwise screwdriver.
  1. Remove all lug nuts from under the wheel arches with a wrench to free your Corsa’s wheel arch trims and rear bumper tips.
  1. Carefully cut a 140mm by 50mm piece of the lower edge of the rear bumper with a jigsaw to reveal and remove the Corsa’s metal impact beam.
  1. Remove the trim on the rear bumper panel and unscrew its bolts with a power drill.
  1. place the plates (included with the tow bar kit) on each end of the Corsa panel, then loosen the bolts with a power drill.
  1. Position the center tube (included with the tow bar kit) under the Corsa’s spare wheel tray, then remove the spare wheel and center bolt with a power drill.
  1. Mount the cross bar (included with the tow bar kit) and screw in the center bolt with a large flat washer.
  1. Straighten the crossbar with your hands to align with the rear body of the Corsa and remove the bolts with a power drill. Attach the large washers to the bolts and screw them back in using a power drill..
  1. Reinstall and tighten all the bolts that were removed from the Corsa, then reattach the crash beam, spare tire, rear bumper, and wheel arches.

Advice

Installing the tow bar on a Corsa is not a difficult task, you just need to have a few tools on hand. Remember not to forget to mount everything you removed to install the tow bar to the vehicle.

Install the tow bar in a Corsa
Race part tracera

Leave a Comment