How to Change the Windshield Wiper Motor on a Chevy Silverado

Hello! good night, at this moment we will created an article about How to Change the Windshield Wiper Motor on a Chevy Silverado

The Chevy Silverado is a famous full-size truck with a popularity of strength, comfort and reliability. Change the Windshield Wiper Motor on a Chevy Silverado It is a maintenance job that you can do yourself, and thus save both your time and money in a mechanic shop.

Steps to Change the Wiper Motor on a Chevy Silverado

Remove The Wiper Motor From A Chevrolet Silverado
Chevrolet Silverado LT 2009

Follow the steps below to change the wiper motor on a Chevrolet Silverado. If your Silverado has common problems with the windshield wipers, it could be caused by a bad motor, even more so if they don’t move on the windshield.

  1. raise the hood and remove the ring from the negative terminal of the battery with the help of a wrench.
  1. Apply some painter’s tape to the front glass just below the windshield washer arms.; use a marker to record their position on the windshield. Pull the washer hoses off the wiper arms. Remove the plastic caps from the washer arms and, using a socket wrench, unscrew the bolts that secure the washer arms. Remove the arms from the washer.
  1. Remove the Torx screws, the plastic clips and the engine cover grill push pin. Remove the rack by pulling it up and then pull it out. Use the socket wrench to loosen the 4 bolts and the reinforcement panel that is located above the wiper cluster. Disconnect the electrical connector from the wiper motor. Remove the windshield washer motor cluster mounting bolts with the socket wrench.
  1. Then unscrew the windshield washer motor cluster from its connection with a medium socket wrench or socket screwdriver. Then pry the linkage out of the motor arm with a simple screwdriver.
  1. Install the new wiper motor by reversing the steps above. Put the negative clamp back on the battery and test the motor by activating the wipers.

In this way you can change the windshield wiper motor of a Chevy Silverado, you must be careful not to alter the position of the arms so as not to discalibrate them.

Don’t forget to read about: How to Change the Windshield Washer Reservoir on a Chevy Silverado

Items you will need

The items and tools to use are:

  • Socket set (or socket)
  • Flat head screwdriver.

The Chevy Silverado is a famous full-size truck with a popularity of strength, comfort and reliability. Change the Windshield Wiper Motor on a Chevy Silverado It is a maintenance job that you can do yourself, and thus save both your time and money in a mechanic shop.

Steps to Change the Wiper Motor on a Chevy Silverado

Remove The Wiper Motor From A Chevrolet Silverado
Chevrolet Silverado LT 2009

Follow the steps below to change the wiper motor on a Chevrolet Silverado. If your Silverado has common problems with the windshield wipers, it could be caused by a bad motor, even more so if they don’t move on the windshield.

  1. raise the hood and remove the ring from the negative terminal of the battery with the help of a wrench.
  1. Apply some painter’s tape to the front glass just below the windshield washer arms.; use a marker to record their position on the windshield. Pull the washer hoses off the wiper arms. Remove the plastic caps from the washer arms and, using a socket wrench, unscrew the bolts that secure the washer arms. Remove the arms from the washer.
  1. Remove the Torx screws, the plastic clips and the engine cover grill push pin. Remove the rack by pulling it up and then pull it out. Use the socket wrench to loosen the 4 bolts and the reinforcement panel that is located above the wiper cluster. Disconnect the electrical connector from the wiper motor. Remove the windshield washer motor cluster mounting bolts with the socket wrench.
  1. Then unscrew the windshield washer motor cluster from its connection with a medium socket wrench or socket screwdriver. Then pry the linkage out of the motor arm with a simple screwdriver.
  1. Install the new wiper motor by reversing the steps above. Put the negative clamp back on the battery and test the motor by activating the wipers.

In this way you can change the windshield wiper motor of a Chevy Silverado, you must be careful not to alter the position of the arms so as not to discalibrate them.

Don’t forget to read about: How to Change the Windshield Washer Reservoir on a Chevy Silverado

Items you will need

The items and tools to use are:

  • Socket set (or socket)
  • Flat head screwdriver.

Leave a Comment