Hello! good night, today we will made an article about How to Change the Fuel Filter on a Ford Expedition
Ford Expedition model years 1997-2006 come equipped with a quick-connect fuel filter. In this post we are going to tell you how to change the fuel filter on a ford expedition.
You should know that the main responsibility of a fuel filter is to prevent any type of impurities found in the fuel from entering the fuel injectors, that way only clean fuel will reach the injectors and the engine.
How to change the fuel filter on a Ford Expedition?
It’s good to change the fuel filter on a Ford Expedition between 60,000 and 75,000 miles. You can purchase the quick disconnect tool you will need for this job at any auto parts store.
The steps you must follow to change the fuel filter on a Ford Expedition are as follows:
- You must first park the Ford Expedition in a place with good ventilation and a flat surface. You must apply the parking brake to prevent the car from moving.
- Then you should slowly remove the fuel filler cap. This process will depressurize the fuel system and prevent fuel from splattering when the fuel lines come off the filter.
- Now you need to slide under the driver’s side of the Expedition and locate the fuel filter, which is mounted on the frame rail directly in front of the gas tank. You should know that the fuel filter is a cylinder shaped component with a quick connect fuel line coming out of each end. Then slide the drip tray under the fuel filter.
- You should put the end of the quick disconnect tool on the end of one of the fuel lines. Next you must press the tool into the fuel line. This will free the fuel line from the fuel filter port. Now pull on the fuel line or rail while simultaneously pressing the tool in. Keep pulling on the fuel line to get it out of the fuel filter port.. Then move the tool to the other fuel line and again repeat the process.
- You have to loosen the clamp around the fuel filter with a flat head screwdriver. Visualize the direction of the arrow on the side of the fuel filter. The replacement fuel filter must be placed with the arrow pointing in the same direction. Next, you need to remove the fuel filter from the bracket that contains it and place it in a drip pan.
- Put the new fuel filter on the clamp where it should go with the arrow pointing in the direction indicated. Tighten the clamp on the fuel filter with the screwdriver. Next, push the two fuel lines straight into the fuel filter ports until each line locks into place. After the lines are pushed far enough into the ports, the plastic clips are going to lock inside the fuel lines. Next, slowly pull out the fuel lines to make sure each fuel line is attached to the fuel filter holes.
- You should now slide the drip pan out from under the Expedition and screw the gas cap back onto the filler tube until it finally clicks.
- Then you must turn the ignition to the accessory position for about five seconds and then turn it back to the off position. You must repeat this a total of three times before starting the engine.
- Start the engine and check the new fuel filter for signs of leaks. around fuel lines. You should let the engine run for half a minute. Finally, turn off the engine.
Tips
The arrow printed on the side of the fuel filter represents the direction of fuel flow through the filter. This arrow should point towards the fuel line going to the engine.
warnings
You should know that you should not smoke or light flames near any kind of fuel. It is good that you wear safety glasses when you change the fuel filter. Check state and local laws regarding the disposal of used fuel and bad fuel filter. Never spill fuel on the ground.
Items you will need
The things you are going to need to change the fuel filter on a Ford Expedition are the following:
Ford Expedition model years 1997-2006 come equipped with a quick-connect fuel filter. In this post we are going to tell you how to change the fuel filter on a ford expedition.
You should know that the main responsibility of a fuel filter is to prevent any type of impurities found in the fuel from entering the fuel injectors, that way only clean fuel will reach the injectors and the engine.
How to change the fuel filter on a Ford Expedition?
It’s good to change the fuel filter on a Ford Expedition between 60,000 and 75,000 miles. You can purchase the quick disconnect tool you will need for this job at any auto parts store.
The steps you must follow to change the fuel filter on a Ford Expedition are as follows:
- You must first park the Ford Expedition in a place with good ventilation and a flat surface. You must apply the parking brake to prevent the car from moving.
- Then you should slowly remove the fuel filler cap. This process will depressurize the fuel system and prevent fuel from splattering when the fuel lines come off the filter.
- Now you need to slide under the driver’s side of the Expedition and locate the fuel filter, which is mounted on the frame rail directly in front of the gas tank. You should know that the fuel filter is a cylinder shaped component with a quick connect fuel line coming out of each end. Then slide the drip tray under the fuel filter.
- You should put the end of the quick disconnect tool on the end of one of the fuel lines. Next you must press the tool into the fuel line. This will free the fuel line from the fuel filter port. Now pull on the fuel line or rail while simultaneously pressing the tool in. Keep pulling on the fuel line to get it out of the fuel filter port.. Then move the tool to the other fuel line and again repeat the process.
- You have to loosen the clamp around the fuel filter with a flat head screwdriver. Visualize the direction of the arrow on the side of the fuel filter. The replacement fuel filter must be placed with the arrow pointing in the same direction. Next, you need to remove the fuel filter from the bracket that contains it and place it in a drip pan.
- Put the new fuel filter on the clamp where it should go with the arrow pointing in the direction indicated. Tighten the clamp on the fuel filter with the screwdriver. Next, push the two fuel lines straight into the fuel filter ports until each line locks into place. After the lines are pushed far enough into the ports, the plastic clips are going to lock inside the fuel lines. Next, slowly pull out the fuel lines to make sure each fuel line is attached to the fuel filter holes.
- You should now slide the drip pan out from under the Expedition and screw the gas cap back onto the filler tube until it finally clicks.
- Then you must turn the ignition to the accessory position for about five seconds and then turn it back to the off position. You must repeat this a total of three times before starting the engine.
- Start the engine and check the new fuel filter for signs of leaks. around fuel lines. You should let the engine run for half a minute. Finally, turn off the engine.
Tips
The arrow printed on the side of the fuel filter represents the direction of fuel flow through the filter. This arrow should point towards the fuel line going to the engine.
warnings
You should know that you should not smoke or light flames near any kind of fuel. It is good that you wear safety glasses when you change the fuel filter. Check state and local laws regarding the disposal of used fuel and bad fuel filter. Never spill fuel on the ground.
Items you will need
The things you are going to need to change the fuel filter on a Ford Expedition are the following:
