How To Change The Antenna On A Ford Fiesta: Steps And Tips

Hi-ya! good night, today we will created an article about How To Change The Antenna On A Ford Fiesta: Steps And Tips

The Ford Fiesta Marv VI, is a vehicle put into production in 2008, this car is the sixth generation of the model and has an aerial antenna fixed on the roof just behind the windshield seal. In this post we are going to tell you how to change the antenna of a Ford Fiesta.

The Ford Fiesta is a car that began its production in the year 1978 and has remained a continuous model for the Ford company. The Fiesta has always been a subcompact car that has focused on fuel mileage over creature comforts.

How to Change the Antenna on a Ford Fiesta

Removing The Antenna From A Ford Fiesta
Ford Fiesta 1.6 SE 2019

To replace the antenna on a Ford Fiesta you only need to follow a few specific steps or you can simply replace a broken antenna as well. For either case here are the steps:

  1. Unscrew your Fiesta vehicle’s antenna from the antenna base using a crescent wrench.
  1. Pry off the cover of the antenna with a small flat screwdriverthen you should try to remove the cover from the base of the antenna.
  1. Remove the two screws that secure the antenna base to the roof of the Ford Fiesta with a screwdriver and lift the antenna base off the car.
  1. Now unscrew the cable connector connected to the bottom of the air base with your fingers.
  1. Screw the cable connector to the bottom area of ​​the new air base with your fingers as well.
  1. Now fix the base to the roof of your Ford Fiesta with the two screws, then proceed to press them with the screwdriver.
  1. Again fit the cover on the airbase again.
  1. Re-thread the antenna with your fingers to prevent the antenna from being threaded crosswise, finally tighten the antenna with the wrench.

Tips

Don’t forget the following:

  • When you are doing this work, try to be careful and you will be able to avoid future problems.
  • Changing the antenna of a Ford Fiesta is not complicated, just follow the steps as indicated.

suggested video

This video can help guide you, although it is in English it could be of great help.

The Ford Fiesta Marv VI, is a vehicle put into production in 2008, this car is the sixth generation of the model and has an aerial antenna fixed on the roof just behind the windshield seal. In this post we are going to tell you how to change the antenna of a Ford Fiesta.

The Ford Fiesta is a car that began its production in the year 1978 and has remained a continuous model for the Ford company. The Fiesta has always been a subcompact car that has focused on fuel mileage over creature comforts.

How to Change the Antenna on a Ford Fiesta

Removing The Antenna From A Ford Fiesta
Ford Fiesta 1.6 SE 2019

To replace the antenna on a Ford Fiesta you only need to follow a few specific steps or you can simply replace a broken antenna as well. For either case here are the steps:

  1. Unscrew your Fiesta vehicle’s antenna from the antenna base using a crescent wrench.
  1. Pry off the cover of the antenna with a small flat screwdriverthen you should try to remove the cover from the base of the antenna.
  1. Remove the two screws that secure the antenna base to the roof of the Ford Fiesta with a screwdriver and lift the antenna base off the car.
  1. Now unscrew the cable connector connected to the bottom of the air base with your fingers.
  1. Screw the cable connector to the bottom area of ​​the new air base with your fingers as well.
  1. Now fix the base to the roof of your Ford Fiesta with the two screws, then proceed to press them with the screwdriver.
  1. Again fit the cover on the airbase again.
  1. Re-thread the antenna with your fingers to prevent the antenna from being threaded crosswise, finally tighten the antenna with the wrench.

Tips

Don’t forget the following:

  • When you are doing this work, try to be careful and you will be able to avoid future problems.
  • Changing the antenna of a Ford Fiesta is not complicated, just follow the steps as indicated.

suggested video

This video can help guide you, although it is in English it could be of great help.

Leave a Comment