Hi-ya! good morning, at this moment we will write an article about How To Activate 4×4 Drive In A Chevy Tahoe Step By Step!
Some Chevrolet Tahoe vehicles come with 4×4 (four wheel drive). If your Tahoe vehicle has this feature, you can certainly activate the four-wheel drive mode or feature. Keep reading this article and learn how to turn on 4×4 drive in a chevy tahoe.
Steps to Activate 4×4 Drive in a Chevy Tahoe
On older Tahoe cars, this was almost always a major drawback; however, Chevrolet in the Tahoe vehicle has replaced the 4×4 shifter with a simple dial. You should know that there are two versions of four-wheel drive in the Tahoe, the 4WD Low y 4WD High.
- Start the engine of your Tahoe. The first thing you should do is shift the Tahoe into “Neutral” and proceed to release your foot from the brake pedal. It is recommended that you go slowly when you start.
- Turn the dial on the four-wheel drive to “4 down”. This is the four wheel drive “Low” mode, you will notice that “Low” appears with a down arrow.
- Check the odometer. You should see a flashing symbol that says “Four wheel drive low“.
- You must wait until the symbol no longer flashes. It has to be stable. Later you have to put the gear selector back in “Drive” with the aim of starting to drive in the four-wheel drive.
- Return the gear selector to “Neutral” any time you are ready to return to two-wheel drive. Let the Tahoe slide slowly. Turn the dial to “2” and the instant the light stops flashing, go back to “Drive“.
Advice
To engage four-wheel drive, turn the dial to “4 Up“With the engine running, your Tahoe does not need to be in “Neutral”. Likewise, when switching back to 2WD from 4×4, there is no need to shift into “Neutral.”
Some Chevrolet Tahoe vehicles come with 4×4 (four wheel drive). If your Tahoe vehicle has this feature, you can certainly activate the four-wheel drive mode or feature. Keep reading this article and learn how to turn on 4×4 drive in a chevy tahoe.
Steps to Activate 4×4 Drive in a Chevy Tahoe
On older Tahoe cars, this was almost always a major drawback; however, Chevrolet in the Tahoe vehicle has replaced the 4×4 shifter with a simple dial. You should know that there are two versions of four-wheel drive in the Tahoe, the 4WD Low y 4WD High.
- Start the engine of your Tahoe. The first thing you should do is shift the Tahoe into “Neutral” and proceed to release your foot from the brake pedal. It is recommended that you go slowly when you start.
- Turn the dial on the four-wheel drive to “4 down”. This is the four wheel drive “Low” mode, you will notice that “Low” appears with a down arrow.
- Check the odometer. You should see a flashing symbol that says “Four wheel drive low“.
- You must wait until the symbol no longer flashes. It has to be stable. Later you have to put the gear selector back in “Drive” with the aim of starting to drive in the four-wheel drive.
- Return the gear selector to “Neutral” any time you are ready to return to two-wheel drive. Let the Tahoe slide slowly. Turn the dial to “2” and the instant the light stops flashing, go back to “Drive“.
Advice
To engage four-wheel drive, turn the dial to “4 Up“With the engine running, your Tahoe does not need to be in “Neutral”. Likewise, when switching back to 2WD from 4×4, there is no need to shift into “Neutral.”
