Fix a Windshield Wiper Stuck in the Upright Position

Hi! good afternoon, now i will created an article about Fix a Windshield Wiper Stuck in the Upright Position

Windshield wipers are a necessity for driving, but they can often get you in trouble. A common drawback is having them stuck upright when not in use. Keep reading and discover the steps you must follow to fix a stuck upright windshield wiper.

The hints and solutions provided in this article are for the most common solution to the problem, which is caused by just one annoying little tab, and it is quite easy to fix.

How to fix windshield wipers stuck upright?

wiper blade stays in the middle of the windshield
wiper blade is in the middle of the windshield

The steps you need to take to fix windshield wipers that get stuck upright and won’t return to their resting place are as follows:

  1. Clean debris from the windshield. Thoroughly scrape off any ice or snow and remove any sticks, leaves, or debris.
  1. Open the hood of the car. Open the driver’s side door and look under the steering wheel, there will be a latch that you can pull that has a hood picture on it.
  1. Remove the driver’s side wiper. Unscrew the wiper blade, pull it out and set it aside.
  1. Remove the foam strip. You don’t need to pull it all the way in, just partially.
  1. remove the plastic caps. Then put it in a safe place.
  1. Remove the plastic cover. You don’t need to remove it completely, just open it up so you have easy access to the inside. And locate the windshield wiper transmission.
  1. Operate the windshield wipers until they are in the rest position. Once the windshield wipers are in the off position, turn off the car.
  1. Grab your hammer and your flathead screwdriver. Tweezers work too, this is just a preference. Press down on the tab until it seats where the transmission will lock.
  1. Test the windshield wipers. Simply running a loop and turning them off will confirm whether they are fixed or not. If you notice, once turned off they should sit in a normal resting position. If they don’t sit well, keep moving the tab until they are set correctly.
  1. Finally put everything back in its place. You’re done!

With these steps you will solve the problem where the wiper blade stays in the middle of the windshield. When you’re fixing a stuck upright windshield wiper don’t forget to try to follow these steps to the letter.

Tips

Among the tips we offer you for this action are:

  • If the wiper doesn’t come off, spray it with a little WD40.
  • If the plastic cover is completely removed, access to the transmission will be easier.

warnings

There are a series of warnings that you should know to avoid inconveniences:

  • Do not force the windshield wipers to be in the home position; run a loop to get them there.
  • Don’t play too much with the tongue; if you do, it may break and you will need to replace it.
  • Do not force the windshield wipers; If you’ve sprayed it with WD40 and still can’t get it off, then don’t do it yourself.
  • Do not lose the plastic caps, they are very important you must store them well.

Things you will need:

  • Hammer
  • flat head screwdriver
  • Pliers

Windshield wipers are a necessity for driving, but they can often get you in trouble. A common drawback is having them stuck upright when not in use. Keep reading and discover the steps you must follow to fix a stuck upright windshield wiper.

The hints and solutions provided in this article are for the most common solution to the problem, which is caused by just one annoying little tab, and it is quite easy to fix.

How to fix windshield wipers stuck upright?

wiper blade stays in the middle of the windshield
wiper blade is in the middle of the windshield

The steps you need to take to fix windshield wipers that get stuck upright and won’t return to their resting place are as follows:

  1. Clean debris from the windshield. Thoroughly scrape off any ice or snow and remove any sticks, leaves, or debris.
  1. Open the hood of the car. Open the driver’s side door and look under the steering wheel, there will be a latch that you can pull that has a hood picture on it.
  1. Remove the driver’s side wiper. Unscrew the wiper blade, pull it out and set it aside.
  1. Remove the foam strip. You don’t need to pull it all the way in, just partially.
  1. remove the plastic caps. Then put it in a safe place.
  1. Remove the plastic cover. You don’t need to remove it completely, just open it up so you have easy access to the inside. And locate the windshield wiper transmission.
  1. Operate the windshield wipers until they are in the rest position. Once the windshield wipers are in the off position, turn off the car.
  1. Grab your hammer and your flathead screwdriver. Tweezers work too, this is just a preference. Press down on the tab until it seats where the transmission will lock.
  1. Test the windshield wipers. Simply running a loop and turning them off will confirm whether they are fixed or not. If you notice, once turned off they should sit in a normal resting position. If they don’t sit well, keep moving the tab until they are set correctly.
  1. Finally put everything back in its place. You’re done!

With these steps you will solve the problem where the wiper blade stays in the middle of the windshield. When you’re fixing a stuck upright windshield wiper don’t forget to try to follow these steps to the letter.

Tips

Among the tips we offer you for this action are:

  • If the wiper doesn’t come off, spray it with a little WD40.
  • If the plastic cover is completely removed, access to the transmission will be easier.

warnings

There are a series of warnings that you should know to avoid inconveniences:

  • Do not force the windshield wipers to be in the home position; run a loop to get them there.
  • Don’t play too much with the tongue; if you do, it may break and you will need to replace it.
  • Do not force the windshield wipers; If you’ve sprayed it with WD40 and still can’t get it off, then don’t do it yourself.
  • Do not lose the plastic caps, they are very important you must store them well.

Things you will need:

  • Hammer
  • flat head screwdriver
  • Pliers

Leave a Comment