Change Front Brake Pads On A Suzuki Grand Vitara

Hi! good afternoon, now we will write an article about Change Front Brake Pads On A Suzuki Grand Vitara

If you have noticed that the brake pads are corroded on your Suzuki Grand Vitara, then you may need to change the front brake pads on a Suzuki Grand Vitarabut first you must be sure that they need to be replaced.

Brake pads are truly affordable, although the estimate of getting someone to replace them at the dealership or at some repair shop is just as shocking. If you own a few other tools and been messing around with keys before, why not consider changing them yourself?

Change the front brake pads on a Suzuki Grand Vitara

The steps you need to take to replace the front brake pads on a Suzuki Grand Vitara vehicle are as follows:

Paso 1:

Park the Grand Vitara on a flat, level, paved or concrete surface. You must apply the parking brake and then release the hood latch. And put a chock behind one of the wheels in the back.

Paso 2:

You should open the hood and suck out half of the brake fluid from the master cylinder using the turkey baster, also don’t forget to dispose of the fluid properly.

Paso 3:

In this step you have to yield the studs of the front tire, the left one, using the half inch breaker bar and also the socket.

Paso 4:

Proceed to jack up the front of the Suzuki and get ready to put a jack stand under the front frame rail on the left. Lower the floor jack and support the Vitara on the jack stand. Then remove the lug nuts and the tire.

Paso 5:

Remove the caliper bolts with a ratchet and socket. Hang the clip on the frame or spring with a bungee cord. It is important not to let the caliper pull the brake hose.

Paso 6:

Pull the old pads out of the caliper anchor. Note if the wear sensor tabs are present and in what position they are so you can reinstall the new pads in the same position.

Paso 7:

Remove the anchor from the caliper. Use the wire brush to clean the clip hardware on the caliper anchor that the pads sit against. Take your time and clean this up as well as possible. Apply a liberal amount of silicone brake lubricant.

Paso 8:

Replace the caliper anchor and tighten it very well. Place the new pads on the anchor. And compress the caliper piston with a C-clamp.

Paso 9:

Clean the caliper bolts with the wire brush and add a little silicone brake lube to the smooth areas of the bolts. Insert the bolts into the caliper and tighten them properly.

Paso 10:

Put the wheel and lug nuts back on and tighten the lug nuts as tight as you can with the tire elevated. Lower the car and again tighten the studs with the adjustable torque wrench and socket. Repeat the same tactic for the right side.

Paso 11:

Pump the pedal about five or six times, until finally the hydraulic pressure is restored in the front caliper pistons and the foot brake pedal is normal. Check and adjust the brake fluid in the master cylinder, but only add new DOT-approved brake fluid. Remove the wheel chock, release the parking brake and test drive.

How to Replace Front Brake Pads on a Suzuki Grand Vitara
Suzuki Grand Vitara 2.4 GLX Sport 2013

If you have noticed that the brake pads are corroded on your Suzuki Grand Vitara, then you may need to change the front brake pads on a Suzuki Grand Vitarabut first you must be sure that they need to be replaced.

Brake pads are truly affordable, although the estimate of getting someone to replace them at the dealership or at some repair shop is just as shocking. If you own a few other tools and been messing around with keys before, why not consider changing them yourself?

Change the front brake pads on a Suzuki Grand Vitara

The steps you need to take to replace the front brake pads on a Suzuki Grand Vitara vehicle are as follows:

Paso 1:

Park the Grand Vitara on a flat, level, paved or concrete surface. You must apply the parking brake and then release the hood latch. And put a chock behind one of the wheels in the back.

Paso 2:

You should open the hood and suck out half of the brake fluid from the master cylinder using the turkey baster, also don’t forget to dispose of the fluid properly.

Paso 3:

In this step you have to yield the studs of the front tire, the left one, using the half inch breaker bar and also the socket.

Paso 4:

Proceed to jack up the front of the Suzuki and get ready to put a jack stand under the front frame rail on the left. Lower the floor jack and support the Vitara on the jack stand. Then remove the lug nuts and the tire.

Paso 5:

Remove the caliper bolts with a ratchet and socket. Hang the clip on the frame or spring with a bungee cord. It is important not to let the caliper pull the brake hose.

Paso 6:

Pull the old pads out of the caliper anchor. Note if the wear sensor tabs are present and in what position they are so you can reinstall the new pads in the same position.

Paso 7:

Remove the anchor from the caliper. Use the wire brush to clean the clip hardware on the caliper anchor that the pads sit against. Take your time and clean this up as well as possible. Apply a liberal amount of silicone brake lubricant.

Paso 8:

Replace the caliper anchor and tighten it very well. Place the new pads on the anchor. And compress the caliper piston with a C-clamp.

Paso 9:

Clean the caliper bolts with the wire brush and add a little silicone brake lube to the smooth areas of the bolts. Insert the bolts into the caliper and tighten them properly.

Paso 10:

Put the wheel and lug nuts back on and tighten the lug nuts as tight as you can with the tire elevated. Lower the car and again tighten the studs with the adjustable torque wrench and socket. Repeat the same tactic for the right side.

Paso 11:

Pump the pedal about five or six times, until finally the hydraulic pressure is restored in the front caliper pistons and the foot brake pedal is normal. Check and adjust the brake fluid in the master cylinder, but only add new DOT-approved brake fluid. Remove the wheel chock, release the parking brake and test drive.

How to Replace Front Brake Pads on a Suzuki Grand Vitara
Suzuki Grand Vitara 2.4 GLX Sport 2013

Leave a Comment