9 Steps to Change the Alternator on a 2000 Ford Windstar

Hi-ya! good night, now we will created an article about 9 Steps to Change the Alternator on a 2000 Ford Windstar

The Ford Windstar at the time was the company’s main minivan Ford Motor Company for the 2000 model. In case you have problems with the alternator and need to replace it, here you will learn how to change the alternator on a ford windstar with simple steps.

Like all modern Ford cars, the Windstar vehicle is based on an alternator device that is responsible for generating electrical energy for the different components of the minivan. And it also has a transmission management system while the engine is in motion.

How to Change the Alternator on a Ford Windstar

Replace The Alternator On A Windstar
Ford Windstar 2001-2003

If the internal generator or external voltage regulator fails on a Windstar car, you have to replace the alternator assembly to continue getting the most out of this vehicle.

Anyone with little or no vehicle repair skills can change the alternator on a 2000 Ford Windstar in as little as 60 minutes.

You may be interested in reading: Know And Troubleshoot Common Alternator Failures

The steps to follow for this work are:

  1. You must first drive and place the front wheels of the Ford vehicle on the rampsthen apply the parking brake and chock the rear wheels by placing the chocks on the ground surface behind each of the wheels.
  1. Now you have to open the hood and separate the end of the negative battery cable from its contact with the battery with a key to remove battery. Then move the tip of the negative cable to the side so it can’t come in contact with the battery until you connect it again.
  1. Locate try to locate an alternator belt routing diagram, applied to the fan shroud, and use it to find the serpentine belt tensioner and alternator. Remove the alternator belt tensioner with the belt tensioner tool, then proceed to push the belt aside while gently moving the tensioner into place.
  1. With your own hand you should try to locate the alternator belt to its pulley. Try to unscrew the alternator ground wire from the rear surface of the alternator using the socket set. There is a possibility that you will have to crawl under the vehicle to get to the back of the alternator, depending on your size and your dexterity.
  1. Now disconnect the wiring harness from the rear area of ​​the alternator and then unbolt the alternator from the engine with the help of a set of wrenches and screwdrivers. You must pull the alternator from the engine with your hands and remove it well from the engine from the bottom. Compare the old and new alternators to make sure they are the same.
  1. Place the new alternator in its proper position and screw in the bolts (or screws) with your hands. Tighten each with the wrench set. Also connect the alternator wire harness by hand and then screw the ground wire to the alternator with the wrench set.
  1. Again connect the tip of the negative battery cable to the negative contact on the battery where it was located before you removed it.
  1. Position the belt on the alternator pulley the same way it was before you removed it, then move the belt tensioner to the side with the help of the belt tensioning tool. Grab the belt onto the belt tensioner pulley and gently push the tensioner back into place again. Remove the tool and close the hood.
  1. Move the wheel chocks and get the Windstar off the ramps

The items you will need

You must have the following things to change the alternator on your Ford Windstar car:

  • 2 snatch
  • battery key
  • 2 wheel chocks
  • Belt tensioning tool
  • Keyset.

The Ford Windstar at the time was the company’s main minivan Ford Motor Company for the 2000 model. In case you have problems with the alternator and need to replace it, here you will learn how to change the alternator on a ford windstar with simple steps.

Like all modern Ford cars, the Windstar vehicle is based on an alternator device that is responsible for generating electrical energy for the different components of the minivan. And it also has a transmission management system while the engine is in motion.

How to Change the Alternator on a Ford Windstar

Replace The Alternator On A Windstar
Ford Windstar 2001-2003

If the internal generator or external voltage regulator fails on a Windstar car, you have to replace the alternator assembly to continue getting the most out of this vehicle.

Anyone with little or no vehicle repair skills can change the alternator on a 2000 Ford Windstar in as little as 60 minutes.

You may be interested in reading: Know And Troubleshoot Common Alternator Failures

The steps to follow for this work are:

  1. You must first drive and place the front wheels of the Ford vehicle on the rampsthen apply the parking brake and chock the rear wheels by placing the chocks on the ground surface behind each of the wheels.
  1. Now you have to open the hood and separate the end of the negative battery cable from its contact with the battery with a key to remove battery. Then move the tip of the negative cable to the side so it can’t come in contact with the battery until you connect it again.
  1. Locate try to locate an alternator belt routing diagram, applied to the fan shroud, and use it to find the serpentine belt tensioner and alternator. Remove the alternator belt tensioner with the belt tensioner tool, then proceed to push the belt aside while gently moving the tensioner into place.
  1. With your own hand you should try to locate the alternator belt to its pulley. Try to unscrew the alternator ground wire from the rear surface of the alternator using the socket set. There is a possibility that you will have to crawl under the vehicle to get to the back of the alternator, depending on your size and your dexterity.
  1. Now disconnect the wiring harness from the rear area of ​​the alternator and then unbolt the alternator from the engine with the help of a set of wrenches and screwdrivers. You must pull the alternator from the engine with your hands and remove it well from the engine from the bottom. Compare the old and new alternators to make sure they are the same.
  1. Place the new alternator in its proper position and screw in the bolts (or screws) with your hands. Tighten each with the wrench set. Also connect the alternator wire harness by hand and then screw the ground wire to the alternator with the wrench set.
  1. Again connect the tip of the negative battery cable to the negative contact on the battery where it was located before you removed it.
  1. Position the belt on the alternator pulley the same way it was before you removed it, then move the belt tensioner to the side with the help of the belt tensioning tool. Grab the belt onto the belt tensioner pulley and gently push the tensioner back into place again. Remove the tool and close the hood.
  1. Move the wheel chocks and get the Windstar off the ramps

The items you will need

You must have the following things to change the alternator on your Ford Windstar car:

  • 2 snatch
  • battery key
  • 2 wheel chocks
  • Belt tensioning tool
  • Keyset.

Leave a Comment