8 Simple Steps To Change A Headlight On A Tucson

Hi! good morning, at this moment i will made an article about 8 Simple Steps To Change A Headlight On A Tucson

Your Hyundai Tucson’s headlight should be checked periodically to make sure it’s working normally. The headlight can suddenly go out for various reasons. The most common reason is moisture buildup inside the casing assembly. But do not worry, because here you will know the necessary steps to change a headlight on a hyundai tucson.

When moisture builds up inside the headlight housing, that moisture can accumulate on the surface of the headlight. If this happens, then the bulb part of the headlight may explode, or moisture may cause an electrical short. Replacement headlights can be purchased at most local or city auto parts stores.

How to change a headlight on a Hyundai Tucson?

The simple steps you need to follow to properly replace the headlight on a Hyundai Tucson are as follows:

  1. Open the hood and remove the two retaining screws at the top of the headlight housing assembly with a Phillips head screwdriver.
  1. Slide the housing assembly forward.
  1. Remove the power connector from the back of the headlight ballast.
  1. Remove the retaining wire clamp from the back of the headlight.
  1. Proceed to remove the headlight from the housing assembly.
  1. Insert the new headlight into the housing assembly and replaces the retaining wire clip to secure the headlight to the housing assembly.
  1. Plug the power connector back into the headlight ballast.
  1. Slide the headlight back against the frame. Thread and tighten the mounting screws with a Phillips head screwdriver.

Item you will need

To change a headlight on a Tucson the only item you will need is:

  • Phillips head screwdriver
front Hyundai Tucson 2006
Hyundai Tucson 2006

Your Hyundai Tucson’s headlight should be checked periodically to make sure it’s working normally. The headlight can suddenly go out for various reasons. The most common reason is moisture buildup inside the casing assembly. But do not worry, because here you will know the necessary steps to change a headlight on a hyundai tucson.

When moisture builds up inside the headlight housing, that moisture can accumulate on the surface of the headlight. If this happens, then the bulb part of the headlight may explode, or moisture may cause an electrical short. Replacement headlights can be purchased at most local or city auto parts stores.

How to change a headlight on a Hyundai Tucson?

The simple steps you need to follow to properly replace the headlight on a Hyundai Tucson are as follows:

  1. Open the hood and remove the two retaining screws at the top of the headlight housing assembly with a Phillips head screwdriver.
  1. Slide the housing assembly forward.
  1. Remove the power connector from the back of the headlight ballast.
  1. Remove the retaining wire clamp from the back of the headlight.
  1. Proceed to remove the headlight from the housing assembly.
  1. Insert the new headlight into the housing assembly and replaces the retaining wire clip to secure the headlight to the housing assembly.
  1. Plug the power connector back into the headlight ballast.
  1. Slide the headlight back against the frame. Thread and tighten the mounting screws with a Phillips head screwdriver.

Item you will need

To change a headlight on a Tucson the only item you will need is:

  • Phillips head screwdriver
front Hyundai Tucson 2006
Hyundai Tucson 2006

Leave a Comment