7 Steps To Adjust The Mazda 3 Emergency Brake

Hi-ya! good morning, now i will made an article about 7 Steps To Adjust The Mazda 3 Emergency Brake

You’ll know it’s time adjust the emergency brake of your Mazda 3 when you park downhill and start to slide. When you notice that it does not brake well, it means that you must make some adjustments to the emergency brake of your Mazda 3.

You don’t need a mechanic to make this quick, easy and affordable repair, just check your owner’s manual to make sure this fitment is correct for the year of your vehicle.

How to adjust the emergency brake on Mazda 3?

The steps to follow to adjust the emergency brake of your Mazda 3 are as follows:

Mazda 3 Emergency Brake Adjustments Needed
Mazda 3 sedan
  1. Start the vehicle and press down and release the brakes four times, then turn off the engine.
  1. Remove the center console hooks and lift the cover. The center console is located inside the front of the car, between the driver and passenger seats.
  1. Adjust the nut under the console by tightening with pliers.
  1. Place chocks behind the front wheels.
  1. Lift the handbrake lever with a single click, then start the engine and look at the control panel. You should watch the parking brake light.
  1. Release the parking brake and raise the rear of the car with a jack.. Slide the ground jacks next to the two rear wheels and lower the car onto them. Turn the rear wheels back and forth with your hands. They should spin freely and easily.
  1. Raise the car a little with the jack and remove the jack feet. Lower the car to the ground and remove the chocks. Re-attach the center console lid.

With these steps you will be able to adjust the emergency brake of the Mazda 3 and avoid unwanted and dangerous slips.

Items you will need:

Adjust Mazda 3 Emergency Brake
2014 Mazda3 (BM) SP25 GT sedan

You’ll know it’s time adjust the emergency brake of your Mazda 3 when you park downhill and start to slide. When you notice that it does not brake well, it means that you must make some adjustments to the emergency brake of your Mazda 3.

You don’t need a mechanic to make this quick, easy and affordable repair, just check your owner’s manual to make sure this fitment is correct for the year of your vehicle.

How to adjust the emergency brake on Mazda 3?

The steps to follow to adjust the emergency brake of your Mazda 3 are as follows:

Mazda 3 Emergency Brake Adjustments Needed
Mazda 3 sedan
  1. Start the vehicle and press down and release the brakes four times, then turn off the engine.
  1. Remove the center console hooks and lift the cover. The center console is located inside the front of the car, between the driver and passenger seats.
  1. Adjust the nut under the console by tightening with pliers.
  1. Place chocks behind the front wheels.
  1. Lift the handbrake lever with a single click, then start the engine and look at the control panel. You should watch the parking brake light.
  1. Release the parking brake and raise the rear of the car with a jack.. Slide the ground jacks next to the two rear wheels and lower the car onto them. Turn the rear wheels back and forth with your hands. They should spin freely and easily.
  1. Raise the car a little with the jack and remove the jack feet. Lower the car to the ground and remove the chocks. Re-attach the center console lid.

With these steps you will be able to adjust the emergency brake of the Mazda 3 and avoid unwanted and dangerous slips.

Items you will need:

Adjust Mazda 3 Emergency Brake
2014 Mazda3 (BM) SP25 GT sedan

Leave a Comment