7 Easy Steps To Change The Coolant In A Mazda 3

Hi-ya! good morning, now we will created an article about 7 Easy Steps To Change The Coolant In A Mazda 3

The Mazda 3 is a compact sport utility vehicle that has been on sale since 2004. The Mazda company recommends replacing your car’s coolant every four years or more or every 60,000 miles (96,600 kilometers). In this post you will learn how to change the coolant in a mazda 3 step by step!

The engine coolant should be a bright green color, if you notice that it is discolored, then it is an indication that it is time to replace it. Do not worry or be alarmed if your Mazda 3 car came from the factory with a 2.0 or 2.3 liter engine, the steps to follow are the same.

The steps you must follow to replace the coolant in your Mazda 3 correctly are as follows:

Replace The Coolant In Your Mazda 3
Mazda 3 Sedan Geneva 2019
  1. Turn off the engine and let it cool completelyand then you must wait at least 25 or 30 minutes before starting the process.
  1. Wrap the radiator cap with a thick hand towel or rag and twist it carefully two or three times to release the pressure.. You should stay away from the car for a few minutes, and without removing the cover completely.
  1. Remove the plastic engine guard located under the front of the engine compartment., the protector is adjusted with screws and with bolts. You have to position it to the side so you can get to the bottom of the radiator.
  1. Remove or remove the cap of the coolant reservoir in order to help the drainage system, you must use a screwdriver to be able to unscrew the radiator drain plug. After you unscrew it, you must pull it to remove it, then you have to let all the coolant drain well into a tray or container. This action should take you between 15 or 20 minutes.
  1. Now pour a gallon (that’s 3.79 liters) of distilled water into the coolant tankthis is done so that the system is cleaned, then let the water drain into the tray with the coolant.
  1. Change the radiator drain plug and refill the tank with coolant, you should know that the coolant capacity of a Mazda 3 car is 7.9 quarts (7.5 liters) which is about two gallons (7.5 liters). Don’t overfill the system, tighten the radiator cap snugly, but not the reservoir cap.
  1. Reconnect the negative battery cable again with the tank lid closed., start the engine and let it rest for a few minutes so that the system can eliminate any air bubbles. Monitor engine operating temperature while it’s running, shut it down, check for leaks, then replace the tank cover and engine guard.

Tips

If your car is used in severe driving conditions, such as excessive heat, humidity, or dust, change the coolant every 30,000 miles (48,000 km). If you are not comfortable replacing the coolant on your own, locate a Mazda dealer in your area or one near you, or go to a mechanic you trust.

warnings

Tap water contains minerals that can damage the cooling system, which is why You should not use anything other than distilled water. One gallon (3.79 liters) can be purchased at almost any grocery store or lube oil store, also do not use coolants containing alcohol, methanol, high borate or silicates.

Your Mazda 3 has an aluminum engine and the chemicals mentioned above can damage it.

Dispose of the coolant properly, as it is against federal law to dispose of it improperly, as it is highly toxic. If you are in the United States, call (800) CLEAN-UP to find nearby disposal facilities.

Change The Coolant In A Mazda 3
Mazda 3 Sport 2016

The Mazda 3 is a compact sport utility vehicle that has been on sale since 2004. The Mazda company recommends replacing your car’s coolant every four years or more or every 60,000 miles (96,600 kilometers). In this post you will learn how to change the coolant in a mazda 3 step by step!

The engine coolant should be a bright green color, if you notice that it is discolored, then it is an indication that it is time to replace it. Do not worry or be alarmed if your Mazda 3 car came from the factory with a 2.0 or 2.3 liter engine, the steps to follow are the same.

The steps you must follow to replace the coolant in your Mazda 3 correctly are as follows:

Replace The Coolant In Your Mazda 3
Mazda 3 Sedan Geneva 2019
  1. Turn off the engine and let it cool completelyand then you must wait at least 25 or 30 minutes before starting the process.
  1. Wrap the radiator cap with a thick hand towel or rag and twist it carefully two or three times to release the pressure.. You should stay away from the car for a few minutes, and without removing the cover completely.
  1. Remove the plastic engine guard located under the front of the engine compartment., the protector is adjusted with screws and with bolts. You have to position it to the side so you can get to the bottom of the radiator.
  1. Remove or remove the cap of the coolant reservoir in order to help the drainage system, you must use a screwdriver to be able to unscrew the radiator drain plug. After you unscrew it, you must pull it to remove it, then you have to let all the coolant drain well into a tray or container. This action should take you between 15 or 20 minutes.
  1. Now pour a gallon (that’s 3.79 liters) of distilled water into the coolant tankthis is done so that the system is cleaned, then let the water drain into the tray with the coolant.
  1. Change the radiator drain plug and refill the tank with coolant, you should know that the coolant capacity of a Mazda 3 car is 7.9 quarts (7.5 liters) which is about two gallons (7.5 liters). Don’t overfill the system, tighten the radiator cap snugly, but not the reservoir cap.
  1. Reconnect the negative battery cable again with the tank lid closed., start the engine and let it rest for a few minutes so that the system can eliminate any air bubbles. Monitor engine operating temperature while it’s running, shut it down, check for leaks, then replace the tank cover and engine guard.

Tips

If your car is used in severe driving conditions, such as excessive heat, humidity, or dust, change the coolant every 30,000 miles (48,000 km). If you are not comfortable replacing the coolant on your own, locate a Mazda dealer in your area or one near you, or go to a mechanic you trust.

warnings

Tap water contains minerals that can damage the cooling system, which is why You should not use anything other than distilled water. One gallon (3.79 liters) can be purchased at almost any grocery store or lube oil store, also do not use coolants containing alcohol, methanol, high borate or silicates.

Your Mazda 3 has an aluminum engine and the chemicals mentioned above can damage it.

Dispose of the coolant properly, as it is against federal law to dispose of it improperly, as it is highly toxic. If you are in the United States, call (800) CLEAN-UP to find nearby disposal facilities.

Change The Coolant In A Mazda 3
Mazda 3 Sport 2016

Leave a Comment