6 Steps To Remove The Dashboard From A Yaris

Hi! good night, now i will created an article about 6 Steps To Remove The Dashboard From A Yaris

A Toyota Yaris dashboard or instrument panel is one of the easiest to remove. here you will learn how to remove the dashboard from a yaris in case you need to do any repair work.

There are four Phillips screws and two bolts that hold the board firmly in place. Plastic clips hold the rest of the dashboard and other components to the trim. Gentle force may be required if the retaining clips are too tight, but be careful not to damage the plastic. A standard screwdriver can be useful for prying into spots that are particularly difficult.

How to Remove the Dashboard from a Yaris

Removing And Replacing The Dashboard Of A Yaris.
Removing And Replacing The Dashboard Of A Yaris.

Here is a series of instructions so that you can remove the dashboard of a Yaris correctly and safely.

  1. Remove the negative terminal of the battery with a socket wrench before starting. This prevents accidental short circuits while unplugging electrical components behind the dashboard.
  1. Remove enough of the edge of the front pillars next to the dash to get to the instrument panel clips below. There are three plastic clips on both sides that can be removed with your fingers. Gently push them up to loosen the right and left sides of the dashboard.
  1. Remove two trim panels from around the sides of the center console climate controls. They break with your fingers. Remove the knobs and sliders from the climate controls and store them in a container so you don’t lose them. Remove a third trim panel from the top of the climate controls.
  1. Unsnap the dashboard lid above the center console with your fingers.. Get it off the dashboard. Unscrew the four Phillips screws from around the instrument panel and carefully remove the instruments. Disconnect two wire harnesses from the back of the instrument panel.
  1. Open the glove box door and push it in.. Remove the entire glove box assembly by unsnapping the bottom with your fingers. Loosen the two 12mm screws on the back of the glove box. You should also carefully loosen the edges of the dashboard all the way, making sure there are no electrical wires caught under the dashboard.
  1. Lift up the instrument panel and remove it from the vehicle. Get a helper if the board is difficult to handle alone. It’s not heavy, but it could be awkward for one person to handle.

These were the steps to remove the dashboard from a Yaris, then you can do whatever checkups and repairs you want.

A Toyota Yaris dashboard or instrument panel is one of the easiest to remove. here you will learn how to remove the dashboard from a yaris in case you need to do any repair work.

There are four Phillips screws and two bolts that hold the board firmly in place. Plastic clips hold the rest of the dashboard and other components to the trim. Gentle force may be required if the retaining clips are too tight, but be careful not to damage the plastic. A standard screwdriver can be useful for prying into spots that are particularly difficult.

How to Remove the Dashboard from a Yaris

Removing And Replacing The Dashboard Of A Yaris.
Removing And Replacing The Dashboard Of A Yaris.

Here is a series of instructions so that you can remove the dashboard of a Yaris correctly and safely.

  1. Remove the negative terminal of the battery with a socket wrench before starting. This prevents accidental short circuits while unplugging electrical components behind the dashboard.
  1. Remove enough of the edge of the front pillars next to the dash to get to the instrument panel clips below. There are three plastic clips on both sides that can be removed with your fingers. Gently push them up to loosen the right and left sides of the dashboard.
  1. Remove two trim panels from around the sides of the center console climate controls. They break with your fingers. Remove the knobs and sliders from the climate controls and store them in a container so you don’t lose them. Remove a third trim panel from the top of the climate controls.
  1. Unsnap the dashboard lid above the center console with your fingers.. Get it off the dashboard. Unscrew the four Phillips screws from around the instrument panel and carefully remove the instruments. Disconnect two wire harnesses from the back of the instrument panel.
  1. Open the glove box door and push it in.. Remove the entire glove box assembly by unsnapping the bottom with your fingers. Loosen the two 12mm screws on the back of the glove box. You should also carefully loosen the edges of the dashboard all the way, making sure there are no electrical wires caught under the dashboard.
  1. Lift up the instrument panel and remove it from the vehicle. Get a helper if the board is difficult to handle alone. It’s not heavy, but it could be awkward for one person to handle.

These were the steps to remove the dashboard from a Yaris, then you can do whatever checkups and repairs you want.

Leave a Comment