5 Steps To Know If The Starter Solenoid Is Damaged Or Bad

Hi! good afternoon, at this time we will created an article about 5 Steps To Know If The Starter Solenoid Is Damaged Or Bad

If you’ve tried to start your vehicle and all you get is a clicking sound, the problem could be with the starter or starter solenoid. The clicking sound is the starter solenoid trying to force the starter gear to engage the engine. Continue reading and discover the 5 steps to follow to know if the starter solenoid is damaged.

The solenoid could be too weak to force the gear into mesh or the bearings inside the starter, and it could freeze up. To determine which component is faulty, you can try jump starter solenoid.

How to know if the starter solenoid is damaged or bad

There are a few tricks you can do to spot a bad starter solenoid. For example, it is a trick to jump the starter solenoid. The steps to follow are those:

  1. Look for the starter motor under the vehicle. In most cases, the starter bolts to the transmission case or bell housing located in the lower half of the engine on the driver’s side. Typically, the starter is about eight inches long and tubular in design. The solenoid bolts to the side of the starter motor and has two wires connected to it..
  1. Locate the two metal contacts on the back of the starter solenoid.. A starter has a cable that goes up to the engine compartment. This is the jumper cable and it connects to the ignition lock for the ignition. The wire connected to the other metal contact goes to the starter motor and is called the jumper cable or generator cable.
  1. Place the metal blade of an insulated screwdriver across both metal contacts. This bypasses the solenoid and creates a direct connection between the starter and the ignition lock.
  1. Get a friend to help you by turning on the ignition with the key. The engine will not start because it has bypassed the solenoid.
  1. Listen to the starter. If you hear a constant humming noise coming from the starter motor, the bearings inside the motor are good and the solenoid is bad. If the engine sounds choppy or won’t start, the starter motor is faulty.

5 Steps To Know If The Starter Solenoid Is Damaged

You can also read: Why A Vehicle Won’t Start: Knowing If It’s The Starter, The Alternator Or The Battery!

If you’ve tried to start your vehicle and all you get is a clicking sound, the problem could be with the starter or starter solenoid. The clicking sound is the starter solenoid trying to force the starter gear to engage the engine. Continue reading and discover the 5 steps to follow to know if the starter solenoid is damaged.

The solenoid could be too weak to force the gear into mesh or the bearings inside the starter, and it could freeze up. To determine which component is faulty, you can try jump starter solenoid.

How to know if the starter solenoid is damaged or bad

There are a few tricks you can do to spot a bad starter solenoid. For example, it is a trick to jump the starter solenoid. The steps to follow are those:

  1. Look for the starter motor under the vehicle. In most cases, the starter bolts to the transmission case or bell housing located in the lower half of the engine on the driver’s side. Typically, the starter is about eight inches long and tubular in design. The solenoid bolts to the side of the starter motor and has two wires connected to it..
  1. Locate the two metal contacts on the back of the starter solenoid.. A starter has a cable that goes up to the engine compartment. This is the jumper cable and it connects to the ignition lock for the ignition. The wire connected to the other metal contact goes to the starter motor and is called the jumper cable or generator cable.
  1. Place the metal blade of an insulated screwdriver across both metal contacts. This bypasses the solenoid and creates a direct connection between the starter and the ignition lock.
  1. Get a friend to help you by turning on the ignition with the key. The engine will not start because it has bypassed the solenoid.
  1. Listen to the starter. If you hear a constant humming noise coming from the starter motor, the bearings inside the motor are good and the solenoid is bad. If the engine sounds choppy or won’t start, the starter motor is faulty.

5 Steps To Know If The Starter Solenoid Is Damaged

You can also read: Why A Vehicle Won’t Start: Knowing If It’s The Starter, The Alternator Or The Battery!

Leave a Comment