5 Steps To Change The Water Pump In A Toyota RAV4

Hello! good afternoon, today we will write an article about 5 Steps To Change The Water Pump In A Toyota RAV4

The Toyota RAV4 is a solid 4-wheel drive vehicle that also comes with a host of standard features that completely outshine its base price. Sometimes this vehicle can present problems with the water pump, for this reason we are giving you in this post the steps to change the water pump in a Toyota RAV4.

As is distinctive of all Toyota brand cars, the RAV4 does not require much maintenance, however several systems require regular maintenance checks.

One check that is critical to the operation of the car is the cooling system. If you find that your RAV4 is no longer cooling properly or your check engine light is coming on at low load, a bad water pump could be the cause. Replacing the water pump on a RAV4 is not difficult.

How to Change the Water Pump on a Toyota RAV4

How to Remove the Water Pump on a RAV4
Toyota RAV4 2007

The steps you will need to replace the water pump in a Toyota RAV4 are as follows:

  1. Park the car on level ground in a safe area so you have full access to the car chassis. Slide under the right side of the RAV4 and locate the timing belt cover – it’s the firm, oblong grayish or black cover – on the lower front area of ​​the engine. Use a ratchet to disengage the mounting bolts from the timing belt cover.
  1. Remove the timing belt cover and pull it off of the bracketsIn addition to this you can locate the water pump just behind the lid. Use a screwdriver to loosen the bolts from the hose clamps on each side of the water motor.
  1. Run the hoses out of the pump and use the liquid retention pan to collect any liquid that may leak. Use the socket wrench to remove the two mounting bolts that hold the water pump in place.
  1. Pull out the old water pump and insert the new water pump in its place. Secure the mounting bolts (or screws) and then put the hoses back in place.
  1. Put the timing belt cover back on, then start the car.. Be sure to run water from a hose into the radiator to help bring the coolant level back down to a safe level.

Well, in this way you will be able to change the water pump in a Toyota RAV4 correctly, do not forget to read the following recommendation.

Caveat

Wear safety glasses and gloves when replacing the water pump on your Toyota RAV4, as antifreeze is bad if it gets as much in your eyes as it does on the rest of your face.

Items you will need

The tools and items to use are as follows:

  • Liquid collection container
  • Socket wrenches (pipe wrench)
  • new water pump
  • Flat head screwdrivers (To remove bolts or screws)
Replace The Mini Water Motor In A RAV4
RAV4 EV 2011

The Toyota RAV4 is a solid 4-wheel drive vehicle that also comes with a host of standard features that completely outshine its base price. Sometimes this vehicle can present problems with the water pump, for this reason we are giving you in this post the steps to change the water pump in a Toyota RAV4.

As is distinctive of all Toyota brand cars, the RAV4 does not require much maintenance, however several systems require regular maintenance checks.

One check that is critical to the operation of the car is the cooling system. If you find that your RAV4 is no longer cooling properly or your check engine light is coming on at low load, a bad water pump could be the cause. Replacing the water pump on a RAV4 is not difficult.

How to Change the Water Pump on a Toyota RAV4

How to Remove the Water Pump on a RAV4
Toyota RAV4 2007

The steps you will need to replace the water pump in a Toyota RAV4 are as follows:

  1. Park the car on level ground in a safe area so you have full access to the car chassis. Slide under the right side of the RAV4 and locate the timing belt cover – it’s the firm, oblong grayish or black cover – on the lower front area of ​​the engine. Use a ratchet to disengage the mounting bolts from the timing belt cover.
  1. Remove the timing belt cover and pull it off of the bracketsIn addition to this you can locate the water pump just behind the lid. Use a screwdriver to loosen the bolts from the hose clamps on each side of the water motor.
  1. Run the hoses out of the pump and use the liquid retention pan to collect any liquid that may leak. Use the socket wrench to remove the two mounting bolts that hold the water pump in place.
  1. Pull out the old water pump and insert the new water pump in its place. Secure the mounting bolts (or screws) and then put the hoses back in place.
  1. Put the timing belt cover back on, then start the car.. Be sure to run water from a hose into the radiator to help bring the coolant level back down to a safe level.

Well, in this way you will be able to change the water pump in a Toyota RAV4 correctly, do not forget to read the following recommendation.

Caveat

Wear safety glasses and gloves when replacing the water pump on your Toyota RAV4, as antifreeze is bad if it gets as much in your eyes as it does on the rest of your face.

Items you will need

The tools and items to use are as follows:

  • Liquid collection container
  • Socket wrenches (pipe wrench)
  • new water pump
  • Flat head screwdrivers (To remove bolts or screws)
Replace The Mini Water Motor In A RAV4
RAV4 EV 2011

Leave a Comment